Need help?Do you have a question about the Onkyo A-9000R and is the answer not in the manual?
General| Output level | 0.001 mV |
|---|---|
| Damping factor | 130 |
| Amplifier class | - |
| Frequency range | 1 - 250000 Hz |
| Output impedance | 300 Ω |
| Input sensitivity | 150 mV |
| Audio output channels | - channels |
| Peak power per channel | 140 W |
| Signal-to-Noise Ratio (SNR) | 107 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Dynamic power per channel (2 Ohm) | 310 W |
| Dynamic power per channel (3 Ohm) | 230 W |
| Dynamic power per channel (4 Ohm) | 180 W |
| Dynamic power per channel (8 Ohm) | 100 W |
| AC (power) in | Yes |
| Audio (L/R) in | 1 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Silver |
| Cables included | AC |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 300 W |
| Package weight | 22500 g |
Weight and Dimensions| Width | 435 mm |
|---|---|
| Height | 175 mm |
| Weight | 18500 g |
Steps to install batteries in the remote controller.
Instructions on how to operate the remote controller.
Guidance on proper placement and ventilation for the amplifier.
Identifies and explains the controls and indicators on the front of the amplifier.
Identifies and explains the connections and controls on the rear of the amplifier.
Details the functions and buttons of the remote control.
Guides on how to connect speakers to the amplifier, including wiring details.
Instructions on how to connect the power cord to the amplifier and wall outlet.
Steps for powering the amplifier on, off, and standby.
How to choose which speaker sets to use for audio output.
Instructions on how to control the audio volume level.
Guide to switching between different audio input sources.
Solutions for power-related issues like not turning on or unexpected shutoff.
Troubleshooting steps for no sound or poor audio quality.
Common issues with playing music from a PC via USB.
Common issues with the remote controller not working properly.
To Next Page
