Onkyo A-9000R User Manual

34
En
Dock is sold separately. Use only the Onkyo Dock with
digital connections.
For the latest information on the Onkyo Dock
components, see the Onkyo web site at:
http://www.onkyo.com
Before using the Onkyo Dock components, update your
iPod with the latest software, available from the Apple
web site.
For supported iPod models, see the instruction manual of
the Onkyo Dock.
About Onkyo Dock
Connect an Onkyo Network Tuner to the integrated
amplifier and enjoy its music. You can use the integrated
amplifier’s remote controller to control the Network
Tuner, but the functionality will depend on your Network
Tuner’s input.
8 button
Sets an Onkyo Network Tuner to Standby.
DIMMER button
Adjusts the display brightness.
!/"/#/$ and ENTER buttons
Select and adjust settings.
SHUFFLE button
Performs shuffle playback. (When the Network Tuner’s
input is set to USB or AirPlay.)
MENU button
Returns to the top menu of the Internet Radio service.
(When the Network Tuner’s input is set to NET.)
REPEAT button
Cycles through the repeat back modes. (When the
Network Tuner’s input is set to USB or AirPlay.)
7 button
Selects the beginning of the current song. Pressing this
button twice selects the previous song. (When the
Network Tuner’s input is set to USB or AirPlay.)
Selects the previous Internet radio station. (When the
Network Tuner’s input is set to NET.)
Selects the previous radio preset. (When the Network
Tuner’s input is set to TUNER.)
1/3 button
Starts or pauses playback. (When the Network Tuner’s
input is set to USB, NET or AirPlay.)
6 button
Selects the next song. (When the Network Tuner’s input
is set to USB or AirPlay.)
Selects the next Internet radio station. (When the
Network Tuner’s input is set to NET.)
Selects the next radio preset. (When the Network
Tuner’s input is set to TUNER.)
INPUT button
Cycles through the input sources.
Controlling the Onkyo Network Tuner
To control the Onkyo Network Tuner, an u
connection is required (➔ page 22).
To control the Onkyo Network Tuner with the
integrated amplifier’s remote controller, you need to
change the input name to “TUNER” (➔ page 36).
8
DIMMER
!/"/#/$
ENTER
Tuner control
buttons

Onkyo A-9000R Specifications

General

Output level	0.001 mV
Damping factor	130
Amplifier class	-
Frequency range	1 - 250000 Hz
Output impedance	300 Ω
Input sensitivity	150 mV
Audio output channels	- channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (2 Ohm)	310 W
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Audio (L/R) in	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	300 W
Package weight	22500 g

Weight and Dimensions

Width	435 mm
Height	175 mm
Weight	18500 g