Onkyo A-9000R User Manual

11
En
Getting to Know the Integrated Amplifier
For detailed information, see the pages in parentheses.
a 8ON/STANDBY button (➔ page 28)
Sets the integrated amplifier to On or Standby.
b Remote control sensor (➔ page 10)
Receives control signals from the remote controller.
c MAIN IN LED (➔ page 27)
Lights when the integrated amplifier is used as a
power amplifier (Main mode).
d Volume controller (➔ page 29)
Adjusts the volume.
e DIRECT switch (➔ page 30)
Enables or disables the Direct function.
f DIRECT LED (➔ page 30)
Lights when the integrated amplifier is in Direct
mode.
g Display Off LED (➔ page 30)
Lights when the information display is turned off.
h Information display
Displays various information.
i INPUT selector (➔ pages 29, 35)
Selects the input sources in sequence. It is also used to
select settings.
j Front flap
Gently push on the lower end of the front panel to
open the flap.
Front Panel
i
debc gf
h
a
j

Onkyo A-9000R Specifications

General

Output level	0.001 mV
Damping factor	130
Amplifier class	-
Frequency range	1 - 250000 Hz
Output impedance	300 Ω
Input sensitivity	150 mV
Audio output channels	- channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (2 Ohm)	310 W
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Audio (L/R) in	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	300 W
Package weight	22500 g

Weight and Dimensions

Width	435 mm
Height	175 mm
Weight	18500 g