Onkyo A-9000R User Manual

24
En
Note
• Volume adjustments and use of the muting function are not reflected in the signal output from LINE
OUT.
• Manual tone adjustments using BASS -/+, TREBLE -/+, BALANCE L/R, and TONE/BAL are not
reflected in the signal output from LINE OUT.
• See the manual of the recording component for instructions on correct use.
Connecting a Recording Component
Important:
• Unless you have the full consent of the copyright holder, copyright laws prohibit using your recordings
for anything other than personal enjoyment!
• Do not change the integrated amplifier’s input while recording. Doing so will cause the audio from the
selected component to be recorded.
AUDIO
IN
L R
Integrated Amplifier A-9000R
Cassette tape deck

Onkyo A-9000R Specifications

General

Output level	0.001 mV
Damping factor	130
Amplifier class	-
Frequency range	1 - 250000 Hz
Output impedance	300 Ω
Input sensitivity	150 mV
Audio output channels	- channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (2 Ohm)	310 W
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Audio (L/R) in	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	300 W
Package weight	22500 g

Weight and Dimensions

Width	435 mm
Height	175 mm
Weight	18500 g