To Next PageTo Next Page
Need help?Do you have a question about the Onkyo A-9070 and is the answer not in the manual?
General| Damping factor | 130 |
|---|---|
| Amplifier class | - |
| Input sensitivity | 150 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 140 W |
| Signal-to-Noise Ratio (SNR) | 107 dB |
| Total Harmonic Distortion (THD) | 0.006 % |
| Dynamic power per channel (3 Ohm) | 230 W |
| Dynamic power per channel (4 Ohm) | 180 W |
| Dynamic power per channel (8 Ohm) | 100 W |
| AC (power) in | Yes |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Cables included | AC |
| Connectivity technology | Wired |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 290 W |
Weight and Dimensions| Depth | 431 mm |
|---|---|
| Width | 435 mm |
| Height | 174.5 mm |
| Weight | 18100 g |
Guide to inserting batteries into the remote controller.
Proper placement and ventilation guidelines for the unit.
Identification of controls and displays on the front panel.
Identification of connectors and ports on the rear panel.
Explanation of buttons and features of the remote controller.
Detailed steps for connecting speaker cables, including polarity.
Steps to safely connect the power cord.
Procedures for analog and digital CD player connections.
Step-by-step guide to powering the amplifier on and off.
Methods for controlling the audio volume level.
How to choose the desired audio input.
Procedure to reset the amplifier to factory defaults.
Solutions for problems related to turning the amplifier on or off.
Troubleshooting steps for when there is no audio output.
