Onkyo A-9070 User Manual

9
En
Getting to Know the Integrated Amplifier
For detailed information, see the pages in parentheses.
a 8ON/STANDBY button (➔ page 26)
Sets the integrated amplifier to On or Standby.
b Remote control sensor (➔ page 7)
Receives control signals from the remote controller.
c MAIN IN LED (➔ page 25)
Lights when the integrated amplifier is used as a
power amplifier (Main mode).
d Volume controller (➔ page 27)
Adjusts the volume.
e DIRECT switch (➔ page 28)
Enables or disables the Direct function.
f DIRECT LED (➔ page 28)
Lights when the integrated amplifier is in Direct
mode.
g Information display
Displays various information.
h INPUT selector (➔ page 28)
Selects the input sources in sequence. It is also used to
select settings.
i Front flap
Gently push on the lower end of the front panel to
open the flap.
Front Panel
h
dbc
g
a
i
ef

Onkyo A-9070 Specifications

General

Damping factor	130
Amplifier class	-
Input sensitivity	150 mV
Audio output channels	2.0 channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.006 %
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Headphone connectivity	6.3 mm
Speakers connectivity type	RCA
Purpose	Home
Product color	Black
Volume control	Rotary
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	290 W

Weight and Dimensions

Depth	431 mm
Width	435 mm
Height	174.5 mm
Weight	18100 g