Onkyo A-9070 User Manual

8
En
Install the integrated amplifier on a sturdy rack or shelf.
Position it so that its weight is evenly dispersed on its four
legs. Do not install the integrated amplifier in a place with
vibration or an unstable location.
The integrated amplifier is designed to have high
conversion efficiency, however, its temperature will
become much higher than other audio equipment.
Therefore, make sure not to hamper heat dissipation by
ensuring proper ventilation.
Installing the Integrated Amplifier
Approx. 12 in.
(30 cm)
Ensure proper ventilation.
Approx. 4 in.
(10 cm)
Approx. 4 in. (10 cm)
Approx. 4 in.
(10 cm)

Onkyo A-9070 Specifications

General

Damping factor	130
Amplifier class	-
Input sensitivity	150 mV
Audio output channels	2.0 channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.006 %
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Headphone connectivity	6.3 mm
Speakers connectivity type	RCA
Purpose	Home
Product color	Black
Volume control	Rotary
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	290 W

Weight and Dimensions

Depth	431 mm
Width	435 mm
Height	174.5 mm
Weight	18100 g