Onkyo A-9070

43
En
Specifications
■ Audio Inputs
■ Audio Outputs
■ Others
Specifications and features are subject to change without
notice.
Rated Output Power
(Stereo): (North American)
75 watts minimum continuous power per
channel, 8 ohm loads, 2 channels driven
from 20 Hz to 20 kHz, with a maximum
total harmonic distortion of 0.05 %
(FTC)
140 watts minimum continuous power
per channel, 4 ohm loads, 2 channels
driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of
0.05 % (FTC)
(European)
2 ch × 75 W at 8 ohms, 20 Hz - 20 kHz,
0.05 %, 2 ch driven (IEC)
2 ch × 140 W at 4 ohms, 20 Hz - 20 kHz,
0.05 %, 2 ch driven (IEC)
Dynamic Power
*
*
IEC60268-Short-term maximum output power
450 W (1 Ω)
310 W (2 Ω)
230 W (3 Ω)
180 W (4 Ω)
100 W (8 Ω)
THD+N (Total Harmonic Distortion+Noise)
0.006 % (1 kHz, half power)
0.008 % (20 Hz - 20 kHz, half power)
Damping Factor 130 (1 kHz, 8 Ω)
Input Sensitivity and Impedance (Unbalance)
150 mV/47 kΩ (LINE)
2.25 mV/47 kΩ (PHONO MM)
0.18 mV/100 Ω (PHONO MC)
Rated RCA Output Level and Impedance
1 V/300 Ω (PRE OUT)
Maximum RCA Output Level and Impedance
5 V/300 Ω (PRE OUT)
Phono Overload 70 mV (MM 1 kHz 0.5 %)
5.2 mV (MC 1 kHz 0.5 %)
Frequency Response 10 Hz - 100 kHz/+0 dB, –1 dB 1 W/8 Ω
1 Hz - 250 kHz/+0 dB, –3 dB 1 W/8 Ω
Tone Control Characteristics
±10 dB, 80 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio 107 dB (LINE, IHF-A)
60 dB (PHONO MM, IHF-A)
70 dB (PHONO MC, IHF-A)
Speaker Impedance 4 Ω - 16 Ω (Speakers A or B)
8 Ω - 16 Ω (Speakers A + B)
HICC 100 A
Power Supply (North American) AC 120 V, 60 Hz
(European) AC 230 V, 50 Hz
Power Consumption (North American) 3.3 A
(European) 290 W
No-sound Power Consumption
80 W
Standby Power Consumption
(North American) 0.1 W
(European) 0.2 W
Dimensions (W × H × D)
435 mm × 174.5 mm × 431 mm
17-1/8" × 6-7/8" × 16-15/16"
Weight 18.1 kg (39.9 lbs.)
Digital Inputs Optical: 1
Coaxial: 2
Digital Input Format 2ch PCM
Digital Input Sampling Rate
32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz
compatible (OPT)
32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz/
176.4 kHz/192 kHz compatible (COAX)
Analog Stereo Inputs LINE 1, LINE 2, LINE 3, PHONO
(MM/MC), MAIN IN
Analog Outputs LINE OUT, PRE OUT
Speaker Outputs 4
Phones 1 (6.3 ø)
RI 2