Need help?Do you have a question about the Onkyo A-9110 and is the answer not in the manual?
General| Output level | 4 mV |
|---|---|
| Amplifier class | - |
| Frequency range | 20 - 20000 Hz |
| Output impedance | 4 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 100 W |
| Signal-to-Noise Ratio (SNR) | 103 dB |
| Total Harmonic Distortion (THD) | 0.05 % |
| Dynamic power per channel (3 Ohm) | 220 W |
| Dynamic power per channel (4 Ohm) | 190 W |
| Dynamic power per channel (8 Ohm) | 110 W |
| DC-in jack | Yes |
| Audio (L/R) in | 4 |
| Audio (L/R) out | 1 |
| Headphone connectivity | 6.3 mm |
| Speakers connectivity type | Banana connector |
| Purpose | Home |
| Impedance | 47 Ω |
| Product color | Black |
| Volume control | Rotary |
| Connectivity technology | Wired |
| AC input voltage | 220 - 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 130 W |
| LED indicators | Status |
| Package weight | 9000 g |
Weight and Dimensions| Depth | 330 mm |
|---|---|
| Width | 435 mm |
| Height | 129 mm |
| Weight | 7000 g |
Covers essential safety warnings, precautions, operating environment, and power cord safety.
Detailed identification and description of the amplifier's front and rear panels.
Instructions for using the remote controller and integrating with other components via RI.
Guides for connecting speakers, powered subwoofers, and audio players via LINE IN.
Connecting turntables, RI components, and initial power cord hookup.
Steps for remote controller preparation, powering on, and setting speaker impedance.
How to select input sources, play connected devices, and adjust the volume.
Adjusting subwoofer output, bass, treble, balance, and using the DIRECT function.
Details on setting the auto standby mode.
Solutions for common issues like power, audio, speakers, noise, and remote control problems.
Comprehensive list of the amplifier's technical specifications.
To Next Page
