Onkyo A-9110 - Connecting a Powered Subwoofer; Connecting Players (LINE in Connection)

10
Preparations
a Subwoofer Cable
You can also connect a Powered subwoofer to the
SUBWOOFER PRE OUT jack to boost bass playback even
more. Use a subwoofer cable for connection.
You can switch the subwoofer output setting between auto/
on/off according to your preference. Refer to "Subwoofer
output settings" (p16) for details.
0 It is recommended to set this off if you are not using a
subwoofer.
a Analog Audio Cable
Use an Analog audio cable to connect a player to one of the
LINE IN 1/2/3/4 jacks. Refer to "Connecting with Onkyo RI
Components" (p11) to use the RI linking function.
Connecting a Powered subwoofer
a
Powered subwoofer
Connecting players (LINE IN
connection)
a
a
CD
Tuner
SN29403405_A-9110_En_1806XX.book 10 ページ ２０１８年７月５日 木曜日 午後２時４３分