Onkyo A-9110 User Manual

15
En
Basic Operations
Perform the following procedure when the unit is on.
1. Press INPUTD/C on the remote controller to switch to
the input with the same name as the jack to which you
have connected the player.
For example, switch to LINE 1 to play the device
connected to the LINE IN 1 jack.
When operating on the main unit, turn the INPUT dial to
switch the input.
0 The indicator for the selected input source lights.
2. Start play on the connected player.
3. Press VOLUME on the remote controller or turn the
volume controller on the main unit to adjust the volume.
Playback
Switching input and adjusting the
volume
1
2
VOLUME
INPUT
SN29403405_A-9110_En_1806XX.book 15 ページ ２０１８年７月５日 木曜日 午後２時４３分

Onkyo A-9110 Specifications

General

Output level	4 mV
Amplifier class	-
Frequency range	20 - 20000 Hz
Output impedance	4 Ω
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	100 W
Signal-to-Noise Ratio (SNR)	103 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (3 Ohm)	220 W
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	110 W
DC-in jack	Yes
Audio (L/R) in	4
Audio (L/R) out	1
Headphone connectivity	6.3 mm
Speakers connectivity type	Banana connector
Purpose	Home
Impedance	47 Ω
Product color	Black
Volume control	Rotary
Connectivity technology	Wired
AC input voltage	220 - 230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	130 W
LED indicators	Status
Package weight	9000 g

Weight and Dimensions

Depth	330 mm
Width	435 mm
Height	129 mm
Weight	7000 g