Onkyo A-9070

26
En
Turning On & Basic Operations
Basic Operations
Turning On the Integrated Amplifier
■ Operating with the remote controller
■ Operating on the integrated amplifier
Tip
• After showing the volume level from the last session, the
message “MUTING” flashes on the information display until
the speakers or headphones become active.
• After a certain time of warming up, the internal temperature of
the integrated amplifier stabilizes, and the sound is softened.
• The integrated amplifier remembers the state when power was
last turned off, and returns to that state.
Turning Off the Integrated Amplifier
■ Operating with the remote controller
■ Operating on the integrated amplifier
Tip
• For details on power management settings, see “Setting the Auto
Standby Function” (➔ page 38).
Turning On/Off the Integrated Amplifier
1
Press 8.
The integrated amplifier comes on, and the
information display lights.
1
Press 8ON/STANDBY.
The integrated amplifier comes on, and the
information display lights.
8ON/STANDBY
1
Press 8.
The integrated amplifier enters Standby mode and the
information display goes off.
1
Press 8ON/STANDBY.
The integrated amplifier enters Standby mode and the
information display goes off.
8