Onkyo A-9000R User Manual

21
En
This is an example of connection using the Network Tuner T-4070.
Note
• To use the u (Remote Interactive) connection, you need to change the names of inputs
(➔ pages 22, 36).
Tip
• Connect your tuner to either of the following jacks: LINE IN 1/2/3.
Note
• To use the u (Remote Interactive) connection, you need to change the names of inputs
(➔ pages 22, 36).
Tip
• Connect the Network Tuner to either of the following jacks: AES/EBU, COAXIAL1/2, OPTICAL.
Connecting a Tuner
Analog Connection
Integrated Amplifier A-9000R
Network Tuner T-4070
Digital Connection (AES/EBU, Coaxial or Optical)
Connect either of them.
Integrated Amplifier A-9000R
Network Tuner T-4070

Onkyo A-9000R Specifications

General

Output level	0.001 mV
Damping factor	130
Amplifier class	-
Frequency range	1 - 250000 Hz
Output impedance	300 Ω
Input sensitivity	150 mV
Audio output channels	- channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (2 Ohm)	310 W
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Audio (L/R) in	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	300 W
Package weight	22500 g

Weight and Dimensions

Width	435 mm
Height	175 mm
Weight	18500 g