Onkyo A-9000R User Manual

12
En
For detailed information, see the pages in parentheses.
k POWER switch (➔ page 28)
This is the main power switch. When set to the OFF
position (@), the integrated amplifier is completely
shut down. It must be switched to the ON position
(^) to set the integrated amplifier to On or Standby.
l SPEAKERS button and A/B LEDs (➔ page 29)
Selects Speakers A, Speakers B, or both. The A and B
LEDs show which speaker set is selected.
m BASS -/+ buttons (➔ page 31)
Adjusts the level of bass sounds. Press the button once
to display the current level value.
n TREBLE -/+ buttons (➔ page 31)
Adjusts the level of treble sounds. Press the button
once to display the current level value.
o BALANCE L/R buttons (➔ page 31)
Adjusts the balance of left and right channels.
p SETUP button (➔ page 36)
Selects and confirms settings.
q PHONES jack (➔ page 32)
Connects headphones with a standard plug.
l
p
q
m n ok

Onkyo A-9000R Specifications

General

Output level	0.001 mV
Damping factor	130
Amplifier class	-
Frequency range	1 - 250000 Hz
Output impedance	300 Ω
Input sensitivity	150 mV
Audio output channels	- channels
Peak power per channel	140 W
Signal-to-Noise Ratio (SNR)	107 dB
Total Harmonic Distortion (THD)	0.05 %
Dynamic power per channel (2 Ohm)	310 W
Dynamic power per channel (3 Ohm)	230 W
Dynamic power per channel (4 Ohm)	180 W
Dynamic power per channel (8 Ohm)	100 W
AC (power) in	Yes
Audio (L/R) in	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Silver
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	300 W
Package weight	22500 g

Weight and Dimensions

Width	435 mm
Height	175 mm
Weight	18500 g