Onkyo C-S5VL

Setup
27
Setup Menu List
* Default setting
Available Settings
PCM FILTER
When using analog output, you can apply a digital
filter to the PCM data before it is passed through the D/
A converter.
The digital filter can switch the properties in the
audible or inaudible frequency ranges. Select the
setting that you prefer (FIL 1 to FIL 5).
The default setting is FIL 1.
For a Super Audio CD, this setting is enabled when the
unit's DIGITAL OUT is switched on. For a CD, this
setting is always enabled, regardless of the unit's
DIGITAL OUT setting.
FIL 1
FIL 2
FIL 3
FIL 4
FIL 5
PCM FILTER FIL1(*)
FIL2ㅜFIL5
DSD FILTER DIRECT(*)
FIL1ㅜFIL4
PHASE NORMAL(*)
INVERT
AREA PRIORITY SACD(*)
CD
-200
-150
-100
-50
0
44.1 88.2
Frequency (kHz)
Response (dB)
-0.1
0
0.1
0 22.05
Frequency (kHz)
Response (dB x 10
-3
)
Frequency Response
Ripple Characteristic
132.3
-200
-150
-100
-50
0
44.1 88.2
Frequency (kHz)
Response (dB)
-0.1
0
0.1
0 22.05
Frequency (kHz)
Response (dB x 10
-3
)
Frequency Response
Ripple Characteristic
132.3
-200
-150
-100
-50
0
44.1 88.2
Frequency (kHz)
Response (dB)
-0.1
0
0.1
0 22.05
Frequency (kHz)
Response (dB x 10
-3
)
Frequency Response
Ripple Characteristic
132.3
-200
-150
-100
-50
0
44.1 88.2
Frequency (kHz)
Response (dB)
-0.1
0
0.1
0 22.05
Frequency (kHz)
Response (dB x 10
-3
)
Frequency Response
Ripple Characteristic
132.3
-200
-150
-100
-50
0
44.1 88.2
Frequency (kHz)
Response (dB)
-0.1
0
0.1
0 22.05
Frequency (kHz)
Response (dB x 10
-3
)
Frequency Response
Ripple Characteristic
132.3