Need help?Do you have a question about the Onkyo CP-1200A and is the answer not in the manual?
General| Motor | DC Motor |
|---|---|
| Speeds | 33 1/3, 45 RPM |
| Platter | Aluminum die-cast |
| Effective length | 230 mm |
| Overhang | 15 mm |
| Dimensions | 450 x 158 x 368mm |
| Weight | 8.5kg |
| Output Level | 2.5 mV |
| Frequency Response | 20Hz to 20kHz |
| Drive method | Belt Drive |
| Tonearm | Static balanced |
| Cartridge | MM type |
| Signal to noise ratio | 60dB |
| Signal-to-Noise Ratio | > 70 dB |
| Type | Belt-drive turntable |
Important warnings to reduce the risk of fire or electric shock.
Check and set the turntable's voltage selector for local AC voltage.
Advice on optimal placement to avoid vibrations and external factors.
Guidance on when and how to replace the stylus for optimal performance.
Explanation of the function of each control on the turntable.
Step-by-step instructions for playing a vinyl record.
Detailed instructions for assembling the turntable components.
Guidance on setting the tonearm balance and tracking force.
Detailed technical data including speeds, dimensions, and weight.
To Next Page
