Need help?Do you have a question about the Onkyo CP-1027F and is the answer not in the manual?
General| Speeds | 33 1/3, 45 RPM |
|---|---|
| Motor | DC Servo Motor |
| Signal to Noise Ratio | 60 dB |
| Overhang | 15 mm |
| Power Consumption | 4 W |
| Power Supply | AC 120V, 60Hz |
| Output | RCA |
| Type | Belt Drive |
| Tonearm Type | Static Balance |
| Cartridge | MM (Moving Magnet) |
| Platter Material | Aluminum |
| Output Voltage | 2.5 mV |
| Tracking Force | 1.5 to 2.5 g |
Adjusts stylus lead-in position using jumper circuits and shutter.
Configures tonearm sensitivity and auto-return position.
Sets tonearm elevation for automatic operation.
Calibrates playback speeds using test records and VR controls.
Connects headshell lead wires and sets tonearm overhang for proper installation.
Explains changing the voltage selector switch for different power inputs.
To Next Page
