Need help?Do you have a question about the Onkyo CP-1010A and is the answer not in the manual?
Allows the turntable to operate at either 110V-120V or 220V-240V.
Adjusts the shut-off position using a fine adjustment screw for earlier or later shut-off.
Procedure to adjust motor speed for 33 and 45 RPM using VR1 and VR2 controls.
Safety precautions for fuse replacement and cabinet component materials.
Instructions for attaching the drive belt and placing the turntable platter on the spindle.
Steps for mounting the cartridge, adjusting stylus tip distance, and connecting lead wires.
Procedure for adjusting counterweight, tracking force, and anti-skating control.
Guidelines for selecting an optimal location to avoid vibrations and environmental factors.
To Next Page
General
