Do you have a question about the Onkyo CP-1057F and is the answer not in the manual?
Drive method | Belt drive |
---|---|
Motor | DC motor |
Speeds | 33 1/3, 45 RPM |
Signal to Noise Ratio | 60 dB |
Tonearm | Static balance type |
Overhang | 15 mm |
Dimensions | 450 x 350 x 120 mm |
Weight | 3.5 kg |
Type | Belt-drive |
Frequency Response | 20Hz to 20kHz |
Platter | Aluminum die-cast, 300 mm diameter |
Guidance on selecting an optimal location for the turntable to ensure performance and avoid issues.
Instructions for cleaning the stylus, turntable, and cabinet to maintain optimal condition.
Details on checking and setting the correct voltage for the turntable's power supply.
Instructions on how to correctly fit the turntable platter onto the center spindle.
Step-by-step guide for attaching a cartridge to the headshell, including wiring.
Guidance on using the overhang gauge to set the correct stylus tip position.
Steps for balancing the tonearm, setting tracking force, and adjusting overhang.
Instructions for initiating and managing fully automatic record playback.
Steps for playing records using manual controls, including cueing.
How to activate and cancel the automatic repeat playback feature.
Recommendations for cleaning records and stylus, and handling records properly.
Important considerations during record playback to prevent damage and ensure sound quality.
Additional warnings regarding placement of objects on the turntable and cabinet.