Need help?Do you have a question about the Onkyo CP-1022A and is the answer not in the manual?
General| Motor | DC Motor |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Channel Balance | 1.5 dB |
| Power Requirements | AC 120V, 60Hz |
| Speed | 33 1/3 RPM, 45 RPM |
| Platter | Aluminum |
| Tonearm | Static Balance Type |
| Cartridge | MM (Moving Magnet) |
| Output Level | 2.5mV |
| Signal-to-Noise Ratio | 60dB |
| Channel Separation | 20dB |
Critical safety information regarding component replacement for fire and shock risk.
Technical specifications of the CP-1022A turntable.
Procedure for testing insulation resistance of the power supply cord and chassis.
Guide for installing a cartridge on the turntable headshell, including wiring.
How to adjust the automatic shut-off mechanism using a fine adjustment screw.
Electrical schematic showing component connections for the turntable.
To Next Page
