43
Listening to the Radio
—Continued
Press the remote controller’s [DISPLAY] button repeatedly to display more radio information.
On the CR-315, you can also use the CD receiver’s [DISPLAY] button to display this information.
RDS is only available on European models and only in
areas where RDS broadcasts are available.
What is RDS?
RDS stands for
Radio Data System
and is a method of
transmitting data in FM radio signals. It was developed
within the European Broadcasting Union (EBU) and
many European FM radio stations use it these days.
The CD receiver supports and displays the Program Ser-
vice Name (PS) and Radio Text (RT) types of RDS data.
The RDS indicator appears on the display when the CD
receiver is tuned to an FM station that supports RDS.
Notes:
• If the signal from an RDS station is weak, RDS data
may be displayed intermittently or not at all.
• The message “Waiting...” may appear while the RT
data is being received.
Displaying Radio Information
DISPLAY
AM/FM
Frequency
*Preset name
* If the selected preset has no name, “No Name” appears
briefly and then the frequency is displayed. See “Nam-
ing Presets” on page 44.
Receiving RDS
Frequency and preset number
Preset name (if preset has no name)
Program Service Name
Radio Text (if available)
Press the [DISPLAY] button repeatedly to dis-
play the following RDS information.
CR515,315En.book Page 43 Wednesday, June 7, 2006 2:36 PM
To Next Page
Loading...
Need help?
General
