Onkyo CR-L5

21
Playing CDs— Continued
With the Repeat function you can play all tracks repeatedly.
1
During playback, press the remote
controller’s [REPEAT] button.
The REPEAT indicator appears on the display and all
tracks are played repeatedly.
2
To cancel Repeat playback, press the
[REPEAT] button again.
The REPEAT indicator disappears.
Notes:
• If you press the [REPEAT] button during memory play-
back, your custom program will play repeatedly.
• If you press the [REPEAT] button during random play-
back, tracks will be played in random order repeatedly.
With the Random function you can play tracks in random
order.
1
While stopped, press the [PLAY
MODE] button repeatedly until the
RANDOM indicator appears on the
display.
2
Press the Play [ ] button to start ran-
dom playback.
3
To cancel random playback, stop play-
back, and then press the [PLAY
MODE] button repeatedly until the
RANDOM indicator disappears.
With the Memory function you can make a custom program
of your favorite tracks.
1
While stopped, press the [PLAY
MODE] button repeatedly until the
MEMORY indicator appears on the
display.
2
To add a track to your program, use
the [ ]/[ ] buttons to select it, and
then press the [ENTER] button.
Tracks can also be added by using the number buttons.
For example, to add track number 6, press [6]. To add
track 13, press [>10], [1], [3].
In this example, track #8 is the fifteenth track to be
added to the program.
The total memory playback time is displayed.
You can check which tracks you’ve added to the pro-
gram by using the [ ]/[ ] buttons.
You can add up to 25 tracks to your program.
3
To start memory playback, press the
Play [ ] button.
Memory playback stops automatically when all the
tracks in the program have been played.
■ To Stop Memory Playback
Press the Stop [ ] button.
■ To Remove the Last Track in the
Program
While memory playback is stopped, press the [CLEAR]
button. Each time you press it the last track in the program
is removed.
■ To Cancel Memory Playback
While memory playback is stopped, press the [PLAY
MODE] button repeatedly until the MEMORY indicator
disappears. The entire program will be deleted.
Notes:
• If you try to add more than 25 tracks to your program, the
message “Memory Full” appears on the display.
• If the total playing time of your program exceeds 99 min-
utes and 59 seconds, “---:--” is displayed. (This does not
affect program playback.)
• The program is deleted when the disc tray is opened.
Repeat Playback
Random Playback
Memory Playback
CR-L5E.book Page 21 Monday, May 19, 2003 4:05 PM