Onkyo CS-265 User Manual

En-22
Playing Your iPod/iPhone/iPad
• Before using your iPod/iPhone/iPad with the CD
receiver, be sure to update your iPod/iPhone/iPad
with the latest software.
• Depending on your iPod/iPhone/iPad, or the type of
content being played, some functions may not work
as expected.
Compatible iPod/iPhone/iPad models
Made for:
iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4,
iPhone 3GS, iPhone 3G, iPhone
iPad Air, iPad mini with Retina display, iPad (4th
generation), iPad (3rd generation), iPad 2, iPad, iPad
mini
iPod touch (1st, 2nd, 3rd, 4th, and 5th generations)
iPod nano (2nd, 3rd, 4th, 5th, 6th, and 7th generations)
(as of August 2014)
1
Press the [USB] button to change the input
source to “USB/iPod.”
You can also change the input source by pressing
the [INPUT] button on the CD receiver
repeatedly.
2
Connect the USB cable that comes with
the iPod/iPhone/iPad to the USB port on
the front of the CD receiver.
While loading your iPod/iPhone/iPad, the CD
receiver indicates “Connecting…” on the display.
If your iPod/iPhone/iPad is not connected
properly, “No USB” appears.
3
Press the Play/Pause [1/3] button.
Playback starts.
You can also operate your iPod/iPhone/iPad to
play back audio.
■ Pausing Playback
To pause playback, press the Play/Pause [1/3]
button.
Press the Play/Pause [1/3] button again to resume
playback. You can also pause playback by pressing the
[2] button.
■ Selecting Tracks
To return to the beginning of the track that’s currently
playing or paused, press the Previous [7] button.
Press the Previous [7] button repeatedly to select
earlier tracks.
Press the Next [6] button repeatedly to select
subsequent tracks.
■ Fast-Forward or Fast-Reverse
During playback, press and hold the Fast Forward
[4] button to fast forward, or the Fast Reverse [5]
button to fast reverse.
■ Random Playback
Press the SHUFFLE [] button repeatedly to switch
the random function of your iPod/iPhone/iPad.
■ Repeat Playback
Press the REPEAT [] button repeatedly to switch the
repeat function of your iPod/iPhone/iPad.
You cannot navigate the iPod menus using the remote
controller if the OS is iOS7 or later.
1
Press the [MENU] button to display the
iPod menu.
2
Use the Arrow [q]/[w] buttons to select an
item on the menu, and then press the
[ENTER] button.
Note:
• The volume level is adjusted by using the VOLUME
[+]/[–] buttons on the CD receiver.
• Some functions might not be available depending on
playback content, or the model or version of iPod/
iPhone/iPad.
This manual describes the procedure for using the
remote controller, unless otherwise specified.
Playing an iPod/iPhone/iPad via
USB
Navigating the iPod Menus with the
Remote Controller

Onkyo CS-265 Specifications

General

Type	Home audio mini system
Cassette deck	No
Product color	White
Optical disc player	Yes
Karaoke	-
Impedance	6 Ω
Speaker type	2-way
Frequency range	30 - 22000 Hz
RMS rated power	40 W
Woofer diameter	100 mm
Tweeter diameter	20 mm
Number of speakers	2
Signal-to-Noise Ratio (SNR)	77 dB
Total Harmonic Distortion (THD)	0.1 %
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Preset stations quantity	30
Display type	LCD
Bluetooth version	4.0
Power source	AC
Input voltage	220-240 V
Input frequency	50 - 60 Hz
Power consumption (standby)	0.4 W
Power consumption (typical)	32 W

Weight and Dimensions

Depth	176 mm
Width	130 mm
Height	210 mm
Weight	1700 g
Package depth	281 mm
Package width	357 mm
Package height	406 mm
Package weight	6700 g
Main unit weight	1900 g
Main unit dimensions (WxDxH)	215 x 273 x 99 mm