To Next Page
P
Phillip SextonSep 23, 2025
Why is there no sound with a certain signal format on my Onkyo Receiver?
- DDavid LeeSep 23, 2025
Check the digital audio output setting on the connected device.
Why is there no sound with a certain signal format on my Onkyo Receiver?
Check the digital audio output setting on the connected device.
How to fix an Onkyo Receiver that turns off as soon as it’s turned on?
If your Onkyo Receiver shuts down immediately after being turned on, the amp protection circuit may have been activated. Unplug the power cord from the wall outlet, disconnect all speaker cables and input sources, and let the receiver sit with the power cord disconnected for one hour. Afterward, reconnect the power cord and set the volume to maximum.
Why is my Onkyo Receiver not turning on?
If your Onkyo Receiver isn't powering on, ensure the power cord is securely plugged into both the AC outlet and the receiver's AC INLET.
How to fix the Onkyo DR-S501 Receiver remote controller if it doesn’t work?
If the remote controller for your Onkyo Receiver is not working, first ensure that the batteries are installed with the correct polarity. If they are, try installing new batteries. Also, make sure you are not too far away from the DVD receiver.
What to do if the Onkyo DR-S501 subwoofer produces no sound?
If your subwoofer isn't producing sound, especially when playing source material without information in the LFE channel, ensure that the subwoofer is configured correctly.
Why doesn't the Late Night function work on my Onkyo Receiver?
The Late Night function will only work if the source material is Dolby Digital.
What to do if the Onkyo Receiver headphones makes noise or no sound?
If your headphones are making noise or producing no sound, clean the headphones terminal, as there may be a bad contact.
What to do if there’s no picture to your TV connected to an HDMI OUT from Onkyo DR-S501?
If you're not getting a picture on your TV connected to an HDMI OUT, the HDMI Output Setting might be set to Off. Try pressing the [HDMI] button on the front panel repeatedly to switch the HDMI Output Setting to on.
Why is there no sound to your TV connected to an HDMI OUT from Onkyo DR-S501?
If there's no sound to your TV connected to an HDMI OUT, it might be because your TV doesn't support Dolby or DTS. In this case, change the 'Digital/HDMI Audio Out' setting to 'PCM'.
Why does the Onkyo Receiver power turn off during operation?
If your Onkyo Receiver is turning off during operation, check if the SLEEP indicator is lit, and if so, cancel the Sleep timer. Also, if the STANDBY indicator is blinking, be careful to avoid shorting the positive and negative wires.
Details the key highlights and capabilities of the DVD receiver.
Lists the various disc types and formats compatible with the DVD receiver.
Instructions for installing batteries into the remote controller.
Guide on how to operate the remote controller and its sensor.
Identifies and describes the controls and indicators on the front of the DVD receiver.
Provides detailed instructions and precautions for connecting speakers to the DVD receiver.
Guides the user through the initial configuration steps upon first power-on.
Instructions on enabling HDMI output and selecting video resolution.
How to set the component video output for progressive or interlaced display.
Explains how to control the audio volume using the receiver and remote.
Details how to choose between different audio and video input sources.
Covers the basic playback controls for starting, pausing, and stopping disc content.
Explains methods for tuning into AM and FM radio stations.
Details how to use the built-in tuner and store favorite stations.
Describes how to choose different audio listening modes available on the receiver.
How to directly select content by entering its number using the search function.
Function to enlarge any part of the picture during playback.
How to select preferred audio tracks or languages.
How to display various information about the current disc or input source.
Instructions on how to control a connected TV using the receiver's remote.
Accesses the main configuration menu for various receiver settings.
Configures the format for digital audio signals, optimizing compatibility.
Adjusts various picture settings like TV shape, brightness, and sharpness.
Configures audio settings including digital/HDMI output and PCM settings.
Sets preferences for disc menus, audio tracks, and subtitles.
Controls onscreen display elements like messages, color, and screen saver.
Manages parental lock, security codes, and priority content settings.
Reconfigures initial setup options like TV shape and language.
Selects the aspect ratio that matches your TV screen.
Allows enabling or disabling the HDMI video output.
Selects the video resolution for the HDMI OUT, supporting 720p and 1080i.
Procedure to reset all receiver settings to factory defaults.
Solutions for issues related to the DVD receiver not turning on or powering off.
Troubleshooting steps for no sound, distorted sound, or quiet audio output.
Troubleshooting audio problems specifically for HDMI connections.
Solutions for discs that fail to play or are ejected immediately.
Troubleshooting audio connection problems with external devices.
Technical specifications for the receiver's amplifier performance.
General| Frequency range | 10 - 100000 Hz |
|---|---|
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.9 % |
| Dimensions (WxDxH) | 435 x 91 x 415 mm |
| Output power description | 50 W/Ch |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Radio Data System (RDS) | Yes |
| Product color | Black |
| Power consumption (typical) | 115 W |
Weight and Dimensions| Weight | 8600 g |
|---|
