Onkyo DR-S501

49
Advanced Playback—Continued
Deleting Items from the List
Editing Steps
Notes:
• To close the “Memory List” window, press the
[RETURN] button.
• The memory list will be deleted when the DVD
receiver is set to Standby or the disc tray is opened.
• To use this function with a VCD that supports PBC,
you must first turn off PBC.
• The Memory Playback function cannot be used with
some discs.
• JPEG images can be added to the memory list, how-
ever, they will not be displayed.
With the “Last Memory” function you can resume play-
back from where you left off even if the disc has been
removed and the DVD receiver has been set to Standby.
“Last Memory” also remembers the soundtrack and sub-
title settings you were using.
Notes:
• The “Last Memory” function can store the last point
for up to six DVDs. When you set the “Last Memory”
function for a seventh disc, the first disc’s settings are
deleted.
• The “Last Memory” function will not work while a
menu is being displayed onscreen.
• The “Last Memory” function may not work with some
DVDs.
Use the Up/Down [ ]/[ ] but-
tons to select it, and then press
the [CLR] button.
The item is deleted and subsequent
items move up the list.
1
Use the Up/Down [ ]/[ ] but-
tons to select the step.
2
Use the Left/Right [ ]/[ ] but-
tons and number buttons to edit
the title/folder (group) or chapter/
track numbers, and then press
[ENTER].
Last Memory
1
During DVD playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, “Last Mem” appears on the dis-
play.
If the [LAST MEMORY] button is
pressed again, the last memory point is
updated.
2
To stop playback, press the Stop
[] button.
Now you may remove the disc
and turn off the DVD receiver.
3
To resume playback, load the
disc, and then press the Play [ ]
button.
The “Last Memory” dialog box
appears.
4
To resume playback from the last
memory point, select “Yes”, and
then press [ENTER].
To start playback from the present
point, select “No”, and then press
[ENTER].
To delete the last memory point, select
“Memory Clear”, and then press
[ENTER].
DVD-V
Yes No Memory Clear
Last Memory is set.
Start playback from memory location?