Onkyo DV-CP702

DV-CP702
UPDATE FIRMWARE-2
Exchange of DVD main board (NADG-7807)
1 Update firmware
Check the version of present firmware.
DVD main board is not necessarily in the newest version.
2 Setting the region code
[Preparation]
Remote controller: RC-484M Part No. 24140484
2
REGION SET
REGION 04
RESET
NO DISC
1
3
2
NO DISC
FL display
Press the "DVD" key and "2" key of the remote controller.
Press the "RETURN" key.
SP SETUP
DVD
RC-484M
1
RETURN
2
12
3
654
7
+
10 0
89
SP SETUP
12
3
654
7
+
10 0
89
SP SETUP
Region-4
Press the 4 key
CPA4P type ( Australian model)
In the case of Australian model
Press the STOP button of unit.
3 Check the version of the firmware and region code
Refer to procedure step 1
Press the number key of region code.
3
CDD1N type (U.S.A. model)
Region-1 Press the 1 key