Onkyo DV-S757

DV-S757
FUNCTION M
SEARCH
23
456
789
1
0
+
10
+
-
PAUSE
DOWN UPFR FF
CLEAR
PROGRAM RANDOM REPEAT A
-
B
STEP/SLOW
KEY
B
[Player's ID Number Setting]
ID Number?
> 0 0 0 0 0 0 0 0 1 OK?
<PLAY> Complata Mode
<SEARCH> Enter
Input ID Number !
[Player's ID Number Setting]
<CLEAR> Exit
Insert the ID Disc !
IN ID DATA
VOL-
COND.M
CH
+
CH
-
TV/
VCR
VOL
+
VOL
-
LAST M DIMMER DISPLAY
MENU
TOP MENU
SETUPRETURN
PAUSE
DOWN UPFR FF
ENTER
FUNCTION M
SEARCH
456
789
0
+
10
-
TV
CLEAR
PROGRAM
DVD
RANDOM REPEAT A
-
B
KEY
B
5
1, 3
2
[Player's ID Number Setting]
Loading The ID data Disc !
[Player's ID Number Setting]
Loading The ID data Disc !
[Player's ID Number Setting]
Rom Write OK !
<CLEAR> Exit
RD ID DATA
WR ID DATA
ID DATA OK
UPGRADE FIRMWARE-9
TV Monitor
Setting the ID number.
2. Press the VOL - button.
TV Monitor FL display
If the writing of ID data to a flash
ROM is completed, it will be
displayed as " Rom Write OK! "
ID data setting
1. Press the open/close button of set and the
tray is pulled out.
2. Load the ID data disc.
3. Press the open/close button and tray is closed.
It becomes such a display
during reading of data from
CDR.
The read-in work of ID data from
CDR starts automatically.
If reading completes ID data
from CDR, next, the writing
of ID data to the flash ROM
of a set will start.
4. Check being displayed as "
Rom Write OK"
1. Input the ID number recorded before using the number button. (Refer to "Check ID number")
6. Put out the disc.
7. Check the ID number.
If ID number is set up, it will
be in ID data input state from CDR.
FL display
8. Check the Firmware.
Number key
1,2 - - - 8,9,0
5. Press the B button of remote controller and setting mode is ended.