Onkyo DX-C540

Using memory functions
iii ee re
Up to 40 tracks can be stored in memory.
Press the MEMORY button.
The MEMORY indicator will light up.
Select the desired disc using the Direct
Play buttons (DISC 1-6).
You may also use the DISC SKIP button
to select a disc.
If you wish to program the entire disc,
select the desired disc and press the
MEMORY button. (“AL (all)” appears.)
To use the number buttons to select the
MEMORY
DISG1 Olsc2 DBCS entire disc, press the “0” button.
Use the kt</ hrm buttons, or the
Osc 1 = SC 2 DISCS IS AIS S DISCS = DISC4 DISCS DISC6 number buttons to select the desired
If you have used the <4 / m1 buttons
to select a track, you must also press the
MEMORY button. The selected tracks are
stored in memory.
To store tracks on other discs into the
memory, repeat steps 2 and 3.
Repeat Step 3 to select a track from the
same disc.
If you attempt to select more than 40
tracks, “FULL” will flash on the time dis-
play to indicate that the memory is full.
Press the # PLAY button.
The CD changer will play the pro-
grammed tracks in the order you selected.
If you press the MEMORY button dur-
ing playback, the track being played will
be stored in memory. You can use the
number buttons to program more tracks.
You will need to select a disc each time
you wish to program a track from a non-
current disc.
NOTES:
@ If the total remaining time is more than
99 minutes 59 seconds or when the con-
tents of the memory extends to 2 or more
discs, “*--:--” will be displayed.
@ Ifaselected disc or track does not exist, the
corresponding indicator (disc or track) will
light up and the selection will be included
in the program count, but the selection(s)
will be ignored and the subsequent disc or
track in the program will play.
OO OO O © TC) (E) (ea track.
Press the &@ STOP button.