Onkyo DX-C540 User Manual

Custom
file/program
functions
OPEN/CLOSE
CUSTOM
FILE
a
¥
SS CUSTOM HH!
=! a =
Ty
Aired
md
Hs
CUSTOM
FILE
leith
in —
ale
REMAIN CISC TIME
FP TF
Ld
-! ri ry
Li ce
The custom file function allows you to store a title or name
for your favorite discs (up to 202 discs). This function is use-
ful if you wish to have the title of the disc displayed when you
select a disc using the DISC SKIP or DISC 1 - DISC 6 but-
tons, or when the playback is ended and the disc player changes
the disc. The titles will also scroll during playback if you have
selected the title display by using the DISPLAY button.
The custom program function allows you to store a set of de-
sired song selections for a disc, so that only those songs will
be played back the next time the disc is played.
. Press the 4 OPEN/CLOSE button to open the loading
drawer, and place a disc for which you wish to prepare
a custom file in the disc tray.
. Press the 4 OPEN/CLOSE button.
The loading drawer will close. Wait until the disc informa-
tion appears on the display.
The custom file function operates only when the disc tray
is closed.
. Use the DISC SKIP button or DISC 1~6 button to se-
lect the disc for which you wish to prepare a custom
file.
Press the CUSTOM FILE button.
The unit enters a mode that enables you to input a title.
Enter characters.
Use the @ or 1 button to select characters and press
the PLAY button. The selected character will be entered,
allowing you to enter the next character.
If you make a mistake, press the m@ STOP button.
Use the «<<, button to move the cursor forward or
backward.
Up to 16 characters can be entered.
To input a blank space, just press the PLAY button without
entering any character.
When you finish entering the title, press the CUSTOM
FILE button.
Pressing the CUSTOM FILE button will take you to cus-
tom program entry mode.
“FILE” will light up and “PROG.” will flash on the dis-
play.
@ If you do not need to use the Custom program function,
press the CUSTOM FILE button again to exit.

Onkyo DX-C540 Specifications

Audio Specifications

sampling frequency	352.8 kHz
number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)
dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)
output level	2 volts r.m.s.

Power

power consumption	1 watts
power supply	120 V, 60 Hz, 230 V, 50 Hz

Weight and Dimensions

dimensions	435 x 131 x 433 mm (17-1/8" x 5-3/16" x 17-1/16")
weight	6.9 kg (15.2 lbs.)