Onkyo DX-C540 User Manual

Custom file/program functions
CUSTOM
FILE
You can modify a custom file only while the
disc is in the tray.
Repeatedly press the CUSTOM FILE
button until the FILE indicator blinks.
Use the << or »® button to move the
cursor to the character you wish to
change.
Use kt or » button of the remote
controlier to change the character.
4. After you modify the file, press the
CUSTOM FILE button.
\
CUSTOM THI
CUSTOM
FILE
You can modify a custom program only
while the disc is in the tray.
1. Repeatedly press the CUSTOM FILE
button until the PROG. indicator
blinks.
2. Press the CLEAR button to erase the
HH BRT OM Ha
ae ee —
Sas neMAN DISC THE program.
Po! Each time you press the button, a pro-
grammed track will be erased, starting
with the last track.
CUSTOM _ 3. Add new tracks to the program if nec-
FILE essary (see “Custom program func-
tion’ on page 17 for information on
how to program tracks). After you
modify the program, press the CUS-
TOM FILE button.

Onkyo DX-C540 Specifications

Audio Specifications

sampling frequency	352.8 kHz
number of channels	2 (stereo)
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)
dynamic range	96 dB
signal to noise ratio	92 dB
channel separation	92 dB (at 1 kHz)
output level	2 volts r.m.s.

Power

power consumption	1 watts
power supply	120 V, 60 Hz, 230 V, 50 Hz

Weight and Dimensions

dimensions	435 x 131 x 433 mm (17-1/8" x 5-3/16" x 17-1/16")
weight	6.9 kg (15.2 lbs.)