EasyManuals Logo

Onkyo HT-R508 Quick Setup

Onkyo HT-R508
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
5/8''
(15mm)
Front left
speaker
Front right
speaker
Center
speaker
Surround right
speaker
Surround left
speaker
Powered
subwoofer
Speaker Layout
Position the speakers as shown below.
Speaker Hookup
QUICK SETUP
Thank you for purchasing this product.
This quick setup sheet shows the typical hookup method for connecting
speakers and AV components (DVD player, TV, cable/satellite receiver).
For more detailed hookup information and operating instructions,
please see the Instruction Manual.
SN 29344428(C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved.
Front
Left
Surround
Left
Surround
Right
Listener
TV
Sub
woofer
Front
Right
Center
Front
Left
Surround
Left
Surround
Right
Listener
TV
Front
Right
Center
Sub
woofer
See the other side of this sheet for the AV component hookup.
Model : HT-R508

Other manuals for Onkyo HT-R508

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo HT-R508 and is the answer not in the manual?

Onkyo HT-R508 Specifications

Amplifier Section IconAmplifier Section
rated output power (FTC)110 watts
rated output power (IEC)5 ch × 130 W
maximum output power (JEITA)5 ch × 160 W
dynamic power (3Ω, 1 ch driven)210 W
dynamic power (4Ω, 1 ch driven)190 W
dynamic power (8Ω, 1 ch driven)130 W
total harmonic distortion (THD)0.08%
damping factor60
input sensitivity and impedance200 mV/ 47 kΩ
output level and impedance200 mV/ 470 Ω
frequency response5 Hz–100 kHz
tone control (bass)±10 dB, 50 Hz
tone control (treble)±10 dB, 20 kHz
signal to noise ratio100 dB
speaker impedance8Ω–16Ω
Video Section IconVideo Section
input sensitivity/output level and impedance (component and s-video y)1 Vp-p /75Ω
input sensitivity/output level and impedance (component pb/cb, pr/cr)0.7 Vp-p /75Ω
input sensitivity/output level and impedance (s-video c)0.28 Vp-p /75Ω
input sensitivity/output level and impedance (composite)1 Vp-p /75Ω
component video frequency response5 Hz – 50 MHz
Tuner Section IconTuner Section
fm tuning frequency range87.5 MHz– 108.0 MHz
am tuning frequency range522 kHz–1611 kHz
radio presets40
General IconGeneral
power supplyAC 230 V, 50 Hz
power consumption560 W
standby power consumption0.3 W
dimensions (W × H × D)435 × 150 × 377 mm
weight10.2 kg

Related product manuals