To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-R518 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| HDMI Inputs | 4 |
| HDMI Outputs | 1 |
| Audio Formats Supported | Dolby Digital, DTS |
| FM Tuner | Yes |
| Tuning range | 87.5 - 108 MHz |
| Speaker impedance | 6 - 16 Ohms |
| Input sensitivity | 200 mV |
| Signal to noise ratio | 100 dB |
| Frequency Response | 10 Hz - 100 kHz |
| Video Connections | Component, Composite |
| Inputs | HDMI, Composite |
| Outputs | HDMI, Component, Composite |
Identifies and explains controls and indicators on the front of the AV receiver.
Explains the various indicators and information shown on the AV receiver's display.
Identifies and explains the various input and output terminals on the rear of the AV receiver.
Explains the functions and operation of the remote controller for the AV receiver.
Details speaker channel configuration based on the number of speakers used.
Details how to connect a powered subwoofer to the AV receiver using a suitable cable.
Guides on how to attach color-coded labels to speaker cables for proper connection.
Step-by-step guide on how to connect speaker cables to the AV receiver terminals.
Instructions for assembling and connecting the supplied AM loop antenna for indoor use.
Instructions for attaching and positioning the supplied indoor FM antenna for optimal reception.
Guidance on installing a commercial outdoor AM antenna when indoor reception is poor.
Advice on using an antenna splitter if the same antenna is used for TV and FM reception.
General advice on making AV connections and reading component manuals.
Details various AV cable types and their corresponding jacks and descriptions.
Guide to selecting appropriate connection formats based on component compatibility.
Describes available video connection formats like composite, S-Video, component, and HDMI.
Describes available audio connection formats like analog, optical, coaxial, and HDMI.
Important steps and precautions for connecting the AV receiver's power cord to the wall outlet.
Instructions on how to turn the AV receiver on and off, and put it into standby mode.
A quick guide to essential initial setup steps for new users.
Guide to using the Audyssey 2EQ system for automatic speaker calibration and room acoustics optimization.
Illustrates the recommended positions for the calibration microphone during setup.
Guide to assigning digital audio inputs (optical/coaxial) to input selectors.
Explains fundamental operations like selecting sources, adjusting volume, and selecting listening modes.
Covers frequently used functions like muting, sleep timer, and display brightness.
How to view information about the current input source, signal format, and volume.
Instructions for tuning into AM and FM radio stations manually or automatically.
Advice for improving reception on weak FM stereo stations by switching to mono.
How to display radio information like band, frequency, and listening mode.
How to select stored radio presets using buttons or remote control.
Instructions on how to remove stored radio presets.
Detailed explanation of RDS, its development, and supported information types.
Lists RDS program types and their corresponding display codes for station searching.
How to search for radio stations based on program type (PTY).
How to search for and listen to radio stations broadcasting traffic news (TP).
Explains how to select various listening modes for different audio sources and formats.
Describes how to select listening modes using buttons on the AV receiver itself.
Describes how to select listening modes using the remote controller buttons.
Explains how to record audio and video signals from various input sources to a recorder.
Guide to overdubbing audio onto video recordings from separate sources.
Guide to adjusting audio settings like Multiplex/Mono, PLII/Neo:6, Panorama, and Dimension.
How to adjust settings for multiplex sources and mono listening mode.
Settings specific to Dolby Pro Logic II and DTS Neo:6 modes.
How to adjust subwoofer sensitivity for multichannel inputs.
Center Image adjustment for Neo:6 Music mode.
Adjusts listening angle settings for the Theater-Dimensional mode.
Adjusting bass and treble for front speakers.
Explanation and settings for Audyssey Dynamic EQ, which optimizes sound at low volumes.
Function to enhance sound quality of compressed music files.
Correcting audio/video sync issues by delaying audio signals.
Reduces dynamic range for Dolby Digital sources, ideal for low-volume listening.
Softens bright movie soundtracks mixed for theaters.
How to check and manually set speaker configuration, sizes, and types.
Detailed guide on specifying connected speakers and their sizes (Small/Large).
Function to boost bass by feeding front channel bass to the subwoofer.
Lists preset remote control codes for common Onkyo components.
Step-by-step guide to entering remote control codes for controlling other devices.
How to reset a REMOTE MODE button to its default code.
Troubleshooting steps for issues related to turning the AV receiver on or off.
Solutions for issues like no sound, quiet sound, or sound from specific speakers only.
Checks for problems with digital audio output settings and signal formats.
Troubleshooting steps for video problems like no picture or HDMI connection errors.
Troubleshooting for tuner reception issues, including FM stereo hiss.
Troubleshooting for recording issues, including no sound or inability to record.
Covers problems with controlling other components, RI functions, and headphone use.
Technical specifications for the amplifier section of the AV receiver.
Technical specifications for the video input and output sections.
Technical specifications for the FM and AM tuner sections.
General specifications including power, dimensions, weight, and control terminal.
