Onkyo HT-R820THX - Page 2

HT-R820THX
SPECIFICATIONS
Amplifier Section
Video Section
Tuner Section
General
Audio Outputs
Analog outputs:
Subwoofer pre out:
Speaker outputs:
Phones:
Specifications and features are subject to change without notice.
Power supply:
Power consumption:
Standby power consumption:
Dimensions
(W x H x D):
Weight:
AC 120 V, 60 Hz
6.6 A
2.5 W
17-1/8" x 5-7/8" x 14-13/16"
(435 x 150 x 376 mm)
22.5 lbs. (10.2 kg)
Video Inputs
Component video inputs:
S-Video inputs:
Video inputs:
2 (DVD, Video 1/2/3)
4 (DVD, Video 1-3)
4 (DVD, Video 1-3)
2 (Tape Out, Video 1 Out)
1
6+2
1
4 (Optical 1-3, Coaxial)
6 (CD, Tape, DVD, Video 1-3)
5.1 ch (Front L/R, Center, S
urround L/R, Subwoofer)
Audio Inputs
Digital inputs:
Analog inputs:
Multichannel analog inputs:
1 (Component Video Out)
2 (Video 1 Out, Monitor Out)
2 (Video 1 Out, Monitor Out)
Video Outputs
Component video outputs:
S-Video outputs:
Video outputs:
FM
Tuning frequency range:
Usable sensitivity:
S/N ratio:
THD:
FM stereo separation:
87.5-107.9 MHz
FM STEREO 17.2 dBf, 2.0 µV (75 IHF)
FM MONO 11.2 dBf, 1.0 µV (75 IHF)
FM STEREO 70 dB (IHF-A)
FM MONO 76 dB (IHF-A)
FM STEREO 0.3% (1 kHz)
FM MONO 0.2% (1 kHz)
45 dB at 1 kHz
AM
Tuning frequency range:
Usable sensitivity:
S/N ratio:
THD:
530-1710 kHz
30 µV
40 dB
0.7%
Input sensitivity, output
level and impedance:
Component video
frequency response:
1.0 Vp-p/75
(component and S-Video Y)
0.7 Vp-p/75
(component PB/CB, PR/CR)
0.28 Vp-p/75 (S-Video C)
1.0 Vp-p/75 (composite)
5 Hz-50 MHz
Power output:
All channels:
Dynamic power:
THD (total harmonic
distortion):
Damping factor:
Input sensitivity and
impedance:
Output level and impedance:
Frequency response:
Tone control:
S/N ratio (Direct mode):
Speaker impedance:
130 W (8 , 20 Hz-20 kHz, FTC)
2 x 260 W (3 , front)
2 x 200 W (4 , front)
2 x 150 W (8 , front)
0.08% (rated power)
60 (front, 1 kHz, 8 )
200 mV/47 k (LINE)
200 mV/470 (REC OUT)
10 Hz-100 kHz/+1 dB,
-3 dB (Direct mode)
±12 dB, 50 Hz (BASS)
±12 dB, 20,000 Hz (TREBLE)
100 dB (CD, IHF-A)
8 ~