To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-RC330 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| HDMI Outputs | 1 |
| Network Capability | Yes |
| HDMI Version | 1.4a |
| 3D Support | Yes |
| Audio Return Channel (ARC) | Yes |
| Total Harmonic Distortion | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| Bluetooth | No |
| Wi-Fi | No |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital |
| Input Sensitivity | 200 mV |
| Signal-to-Noise Ratio | 100 dB |
| Power Output | 100W per channel (8 ohms, 20Hz-20kHz, 0.08% THD, 2 channels driven) |
Details the controls and indicators on the front face of the AV receiver.
Explains how to operate the AV receiver using the remote control.
Details how to operate the AM/FM tuner section using the remote control.
Provides instructions and diagrams for connecting speaker cables to the AV receiver.
Describes how to use color-coded labels for proper speaker cable identification.
Lists important safety and best practice guidelines for connecting speakers.
Offers advice on positioning and connecting a powered subwoofer for optimal bass performance.
Explains different video and audio connection types and their corresponding jacks.
Guides on how to play audio/video from connected sources using the remote or receiver.
Explains how to select different sound modes for movies, music, and games.
Guides on how to configure speaker outputs for two different zones or speaker sets.
Sets the receiver to automatically turn off after a specified time.
Explains how to record audio and video sources to external recording devices.
Details how to record separate audio and video sources for dubbing.
Introduces the on-screen setup menus for configuring receiver settings.
Outlines the general steps for navigating and using the setup menus.
Setting to enable or disable the subwoofer connection and its configuration.
Adjusts the frequency point where the subwoofer and main speakers share audio.
Configures speaker distances to optimize sound arrival times for surround effects.
Adjusts audio channel output for multiplex sources or mono playback.
Configures settings for Dolby Pro Logic II Music listening modes like Panorama, Dimension, and Center Width.
Settings related to DTS audio modes such as Neo:6 Music.
Allows adjustment of audio delay to synchronize with video signals, correcting lip-sync issues.
Allows assigning custom names to input selectors for easier identification.
Sets priority for audio input sources when multiple digital or analog inputs are assigned.
Controls whether the volume level is displayed on-screen when adjusted.
Settings for the remote control, including changing the remote ID.
Sets the frequency tuning step for AM/FM radio based on regional standards.
Enables control of RIHD-compatible components via HDMI for system integration.
Allows HDMI signals to pass through the receiver even when it's off or in standby.
Determines if audio from connected components is output through the TV's speakers.
Enables audio from the TV to be sent back to the AV receiver via HDMI.
Adjusts bass and treble levels for front speakers to tailor the sound profile.
Allows manual adjustment of individual speaker volume levels for balanced output.
Reduces dynamic range for Dolby Digital/Plus/TrueHD sources for quiet listening.
Explains how to connect and use the iPod/iPhone with the Onkyo Dock for playback and control.
Details how to control iPod/iPhone functions using the AV receiver's remote controller.
Lists components controllable with preset codes without needing to enter them.
Guides on how to input specific remote control codes for unlisted components.
Explains control of players supporting RIHHD via HDMI connection.
Solutions for the receiver not turning on, turning off unexpectedly, or showing power interruption messages.
Troubleshooting steps for no sound, quiet sound, or incorrect speaker output.
Details video connection options like composite, component, and HDMI, and their signal path.
Explains audio connection types like analog, optical, coaxial, and HDMI, and their signal path.
Lists the necessary requirements for USB devices to be compatible with the receiver.
Details the audio file formats (MP3, WMA, AAC, FLAC) supported for USB playback.
Lists the audio formats that can be transmitted via HDMI, including PCM and bitstream.
Explains HDCP copy protection and its role in digital video signal transmission.
Identifies compatible TV, player, and recorder models that support RIHID for system control.
Outlines linked operations possible with RIHHD-compatible devices, like standby sync and input switching.
Guides on establishing HDMI and audio connections between the TV and receiver.
Instructions on verifying settings and confirming linked operations for HDMI control.
Explains how to operate connected components using the AV receiver's remote control.
Lists technical specifications for the amplifier, including output power and distortion.
Provides general specifications like power supply, dimensions, weight, and power consumption.
Details HDMI capabilities, including supported video resolutions and audio formats.
Specifies video input/output levels, impedance, and frequency response.
Lists FM and AM tuning frequency ranges and preset channel capacity.
