To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-RC260 and is the answer not in the manual?
How to insert batteries into the remote control unit.
How to point the remote control at the AV receiver's sensor.
Details of buttons and indicators on the front of the AV receiver.
Instructions for operating the AV receiver using the remote control.
How to use the remote to control the AV receiver's tuner.
Explanation of how to set up speakers for an optimal home theater experience.
Guide to connecting speakers to the AV receiver for surround sound.
Instructions for using color-coded labels to connect speaker wires correctly.
Step-by-step guide for connecting speaker cables using screw or banana plugs.
How to connect a powered subwoofer to the AV receiver's pre-out jacks.
Instructions for bi-amping front speakers for improved sound quality.
Diagrams showing typical AV component connections.
Explanation of different audio and video cables and their corresponding jacks.
Default input assignments for connecting components via HDMI.
How to use the ARC function to send audio from TV to receiver.
Default input assignments for connecting various external components.
Instructions on how to connect for video recording.
How RI enables automatic system power on and input selection.
How RI automatically selects input source when playback starts.
Using the AV receiver's remote to control RI-capable Onkyo components.
Options for connecting video sources to the AV receiver.
How the AV receiver prioritizes input signals.
Options for connecting audio sources to the AV receiver.
Steps to power on the AV receiver from the front panel or remote.
Steps to power off the AV receiver to standby mode.
How to choose the language for the setup menu display.
How to play audio/video from connected components.
How to view current input source and signal details.
How to adjust the brightness of the AV receiver's display.
Adjusting audio settings like bass, treble, and dynamic EQ.
Adjusting video settings like picture mode and aspect ratio.
Viewing information about audio, video, and tuner status.
Selecting input sources and checking ARC status.
Selecting preferred listening modes for different sources.
Positioning the microphone for the initial room measurement.
Positioning the microphone for the second room measurement.
Positioning the microphone for the third room measurement.
Initializing the automatic speaker setup and room correction process.
How to tune in AM and FM radio stations.
Basic steps for tuning and listening to radio stations.
Methods for tuning to radio stations: auto, manual, by frequency.
How to connect recording devices like VCRs or CD players.
Recording audio from one source and video from another simultaneously.
Step-by-step guide for recording audio and video.
How to choose different sound processing modes.
Overview of buttons on the remote for selecting listening modes.
Key to symbols and diagrams used in listening mode descriptions.
Supported audio formats for listening modes.
How speaker configurations affect listening mode availability.
How to access and navigate the AV receiver's setup menus.
General steps for using the setup menu with the remote control.
Configuring input and output assignments for AV components.
Setting up speaker configurations and crossover frequencies.
Adjusting audio settings like bass, treble, and listening modes.
Configuring settings for individual input sources.
Assigning default listening modes to input sources.
Various settings including volume, display, and OSD.
Configuring hardware-related settings like Remote ID and HDMI.
Setting up remote control functions and codes.
Locking or unlocking the setup menus to prevent changes.
Setting the output resolution for HDMI and Component Video Monitor OUT.
Options for video signal pass-through and conversion.
Assigning HDMI inputs to input selectors for proper component recognition.
Manual adjustment of speaker settings, especially after Audyssey setup.
Specifying speakers connected to Front High/Wide/Zone 2 terminals.
Specifying speakers connected to Surround Back/Front High/Wide terminals.
Setting subwoofer presence and crossover frequency.
Setting front speaker type and crossover frequency.
Setting center, surround, and other speaker types and crossovers.
Selecting the number of surround back channels.
Setting the low-pass filter for the LFE channel.
Enabling bass boost by feeding bass sounds to the subwoofer.
Adjusting the subwoofer's volume level.
Adjusting the center speaker's volume level.
Adjusting audio channel selection and mono playback settings.
Settings for Dolby PLIIx Music mode, including Panorama and Dimension.
Adjusting the gain for front high speakers in Dolby PLIIz Height mode.
Adjusting center image for DTS Neo:6 Music mode.
Adjusting the soundstage width for Audyssey DSX.
Optimizing Theater-Dimensional mode based on speaker angle.
Enhancing sound quality at low volume levels.
Maintaining consistent volume levels across programs.
Reducing video signal delay for game consoles.
Adjusting the aspect ratio of the picture.
Optimizing picture processing for movies.
Adjusting picture sharpness.
Reducing noise in the picture.
Adjusting the picture brightness.
Adjusting the picture contrast.
Adjusting the red/green balance of the picture.
Adjusting the color saturation of the picture.
Limiting maximum volume and setting power-on volume.
Configuring on-screen display of operation details.
Setting the display language for setup menus.
Changing the remote control ID to prevent interference.
How to change the remote controller's ID to match the receiver's.
Settings for tuner operation, including frequency steps.
Settings related to HDMI connectivity and features.
Controlling audio output from HDMI IN to the HDMI OUT.
Enabling HDMI lip sync for automatic audio delay correction.
Enabling RIHD for system control over HDMI.
Adjusting bass and treble for front speakers.
Adjusting the subwoofer's volume level.
Adjusting the center speaker's volume level.
Enhancing sound quality at low volume levels.
Maintaining consistent volume levels across programs.
Ways to connect Zone 2 speakers directly or to an external amp.
Setup for 5.1 main room and 2-channel Zone 2 stereo playback.
Setup for 7.1 main room and 2-channel Zone 2 stereo playback.
How to turn Zone 2 on/off and select input sources.
Adjusting Zone 2 volume using the AV receiver's remote.
Adjusting Zone 2 volume directly on the AV receiver.
Connecting UP-A1 Dock or RI Dock for iPod control.
Basic operation, auto power, direct change, and remote control.
Using iPod alarm clock for automatic playback initiation.
Charging the iPod's battery while docked in the UP-A1 Dock.
Interpreting status messages related to the connected dock.
System functions like System On, Auto Power On, Direct Change for RI Dock.
Controlling iPod functions using the AV receiver remote.
Using iPod alarm clock for automatic playback initiation.
Important operational notes for using the RI Dock.
Controlling an iPod in the UP-A1 Dock.
Controlling iPod without RI connection.
Controlling an RI Dock without RI control.
Controlling an RI Dock with RI control.
List of preprogrammed remote control codes for various components.
How to find remote control codes using the on-screen menu.
Setting up remote control modes and codes.
Steps to resolve issues when the AV receiver won't power on.
Troubleshooting the red STANDBY indicator, indicating protection circuit activation.
Troubleshooting audio issues including no sound or low volume.
Steps to diagnose and fix issues with no or low audio output.
Steps to diagnose and fix issues with no video output.
Troubleshooting issues when recording is not possible.
Troubleshooting no sound in Zone 2 playback.
Troubleshooting no sound from Zone 2 speakers.
How headphone connection affects listening modes.
Notes on automatic speaker distance setting.
Selecting language for multiplex audio sources.
Troubleshooting RI connection issues.
Why RI system functions may not work with Zone 2.
Causes and solutions for Audyssey setup failing due to ambient noise.
How to adjust composite video input settings from the unit.
Step-by-step guide for connecting and configuring RIHD components.
General
