To Next PageTo Next Page
Need help?Do you have a question about the Onkyo HT-RC370 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| HDMI Inputs | 6 |
| 3D Support | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity and Impedance | 200 mV/47 kOhms |
| Signal-to-Noise Ratio | 106 dB |
| Bluetooth | No |
| Wi-Fi | No |
| HDMI Outputs | 1 |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus |
| Network Connectivity | Ethernet |
| Digital Audio Inputs/Outputs | Optical, Coaxial |
| Audio Inputs/Outputs | Analog audio inputs/outputs, Phono input, Optical/Coaxial digital inputs |
User information and compliance details for FCC regulations in the US.
Instructions on how to insert batteries into the remote controller.
Illustration and identification of controls on the front panel of the AV receiver.
How to operate the AV receiver using its dedicated remote controller.
Guide on how to connect speaker cables to the AV receiver's speaker terminals.
Important safety and connection tips for connecting speakers to the AV receiver.
Instructions for positioning dipole speakers for optimal surround sound effects.
Overview of different video connection formats for AV components.
Explanation of the HDMI ARC feature for sending audio back to the receiver.
Steps to power on the AV receiver using the front panel or remote control.
Steps to play audio/video from connected source components.
How to tune stations directly by entering their frequency.
Automatically determines speaker settings using a microphone and test tones.
How to select different audio listening modes for playback.
How to set the AV receiver to turn off automatically after a specified period.
General steps for navigating and performing settings in the setup menu.
How to check or manually adjust speaker configuration, impedance, and type.
How to select audio channels or languages for multiplex sources.
Enables or disables Audyssey processing for optimizing sound based on room acoustics.
Determines the aspect ratio of the video output for optimal display.
Configure display range for volume, muting level, and maximum volume settings.
Passes HDMI signals through to connected TV/monitor without processing.
How to look up and assign remote control codes for various components.
Two methods to connect Zone 2 speakers for audio playback in another room.
How to use the optional Onkyo Dock for iPod/iPhone playback and control.
Lists buttons with preprogrammed codes for controlling various AV components.
Steps to update firmware using a wired Internet connection.
Step-by-step guide to connecting and setting up RIHD-compatible devices for linked operations.
Diagram and explanation of connecting the AV receiver to a home network for internet radio.
