Advanced Operations
En-39
CinemaFILTER
■ Cinema Filter
` Off
` On
Turn this setting on to soften overly bright movie
soundtracks, which are typically mixed for reproduction in
a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
Dolby Pro Logic II Movie, Multichannel, DTS, DTS Neo:6
Cinema, DTS 96/24, DTS-HD High Resolution Audio,
DTS-HD Master Audio and DTS Express.
Note
• The CinemaFILTER may not work when used with certain input
sources.
Note
• This procedure can also be performed on the AV receiver by
using SETUP, the cursor buttons, and ENTER.
Explanatory Notes
a Menu selection
b Setting target
c Setting options (default setting underlined)
Using the Setup Menu (HOME)
1
Press RECEIVER followed by HOME.
2
Use q/w to select “Setup”, and then press ENTER.
3
Use q/w to select a menu item, and then press
ENTER.
4
Use q/w to select a setting target, and use e/r to
change the setting.
Press HOME to close the menu.
Press RETURN to return to the previous menu.
RETURN
HOME
RECEIVER
ENTER
q/w/e/r
Remote
indicator
Menu Sp Config
■ Subwoofer
` Yes
` No
a
b
c
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Network Setup
Setup
BD/DVD
CBL/SAT
GAME
PC
AUX
TV/CD
Menu
Setting target
To Next Page
Loading...
Need help?
General
