Onkyo HT-RC660(B) User Manual

CONFIRMATION OF VIDEO SIGNAL-DETECTION
2. Confirm the following indicator lights up on the FL TUBE when the following video signal is input.
3. Furthermore, confirm the following indicator is turned off on the FL TUBE when the following video signal isn't input at the
following test mode as well.
Input terminal
Indicator
(1) (2)
Composite
FM STEREO
Component
RDS
1-2. [TV/CD] + [ON/STANDBY] → [PC]
1-1. set the volume level to 25(TX-NR636, DTR-30.6) or 30(TX-NR737, 838, DTR-40, 50.5).
1. Do the following operation.
to the following test mode.
TEST 5-01
1-3. [TONE +]
Confirm Video output signal as shown Table 2, while Video signal are input as shown Table 1 in "Video in_out" sheet.
Component HDMI
BD/DVD --- --- --- IN1 F
CBL/SAT A IN1 E IN2 G
STB/DVR B --- --- IN3 H
GAME C --- --- IN4 I
--- --- --- --- IN5 J
--- --- --- --- IN6 K
--- --- --- --- IN7 ---
AUX D --- --- AUX L
Video Signal ->
Composite Video
Output
Test mode
5-00(BD/DVD)
5-01(CBL/SAT)
5-02(STB/DVR)
5-03(GAME)
5-04(PC)
5-05(IN6)
5-06(IN7)
5-07(AUX)
5-08(CBL/SAT)
5-09(CBL/SAT)
A
E
E
A
---
A
---
---
---
D
---
L
---
---
J
---
---
K
B
---
H
C
---
I
---
---
F
A
E
G
MONITOR OUT
OUT
MAIN OUT
Composite Video
Component
HDMI
Table-1
Table-2
<NOTE>Confirm the HDMI path at 1080p signal.
CONFIRMATION OF VIDEO IN/OUT
CONFIRMATION OF FL DISPLAY
The contents of the step are as follows.
1. Lit all segment
2. Lit '23456789ABCDEF'.
3. Lit a even number segment
4. Lit an odd number segment
5. The Destination setting is displayed.
1-2. [TV/CD] + [ON/STANDBY] → [DIMMER(RT/PTY/TP)]
1-1. set the volume level to 25(TX-NR636, DTR-30.6) or 30(TX-NR737, 838, DTR-40, 50.5).
1. Do the following operation.
to the FL test mode
[TONE-] = Step down
[TONE+] = Step up
*Sub OUT/Zone2 OUT
* TX-NR636, TX-NR737, DTR-30.6 --- Sub OUT
TX-NR838, DTR-40.6, DTR-50.6 --- Zone2 OUT
TX-NR636/ 737/ 838/ HT-RC660/ HT-R993/ DTR-30.6/ 40.6/ 50.6
OPERATION CHECK-6

Onkyo HT-RC660(B) Specifications

General

Brand	Onkyo
Model	HT-RC660(B)
Category	Receiver
Language	English