En-15
Listening to the Radio—Continued
■ Tuning into Stations by Frequency
You can tune to FM stations directly by entering the
appropriate frequency.
1
Press the remote controller’s [D.TUN] button.
(Actual display depends on the country.)
2
Within 8 seconds, use the number buttons
to enter the frequency of the radio station.
For example, to tune to 87.50 (FM), press 8, 7, 5, 0.
Presetting FM Stations
You can store up to 40 of your favorite FM radio stations
as presets.
Presetting FM stations is performed by the tuner.
1
Tune to the FM station that you want to
store as a preset.
2
Press the [MEMORY] button.
The preset number flashes.
(Actual display depends on the country.)
3
While the preset number flashes (about 8
seconds), use the PRESET [a]/[s] buttons
to select a preset from 1 through 40.
4
Press the [MEMORY] button again to store
the station or channel.
The station or channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your favorite FM
radio stations.
D.TUN
Number
buttons
AUTO
SCAN
MEMORY
PRESET
TUNING
MODE
TUNING
SETUP
& , ( , # , 5 ,
ENTER
Number
buttons
To Next Page
Loading...
Need help?
General
