Onkyo T-4030-S

En- 21
Advanced Setup
You can adjust the brightness of the display.
1
Press the remote controller’s [DIMMER]
button repeatedly to select: dim, dimmer, or
normal brightness.
If you weak radio station is frequently received during
AutoPreset/Scan, set the “Search Level” setting to
“Strong” to receive the strong radio station only. The
default setting is “Strong”.
1
Press the [SETUP] button on the remote
controller.
The setup menu appears in the display.
2
Use the Arrow [ ]/[ ] buttons to select
“Search Level”, and then press [ENTER].
The Hardware setup menu appears in the display.
3
Use the Arrow [ ]/[ ] buttons to select
“Normal” or “Strong”.
4
Press the [ENTER] button on the remote
controller to complete the setting.
Note:
• Press [RETURN] to return to the previous menu.
Auto Standby
When “ASb” is set to “On”, the tuner will automatically
enter Standby mode if there is no operation for 30
minutes with no radio station received.
“ASb” will appear on the display 30 seconds before the
Auto Standby comes on.
Default setting: On
Notes:
• With some sources, the Auto Standby function may
activate itself during playback.
1
Turn on the pow er.
2
Press the [SETUP] button on the remote
controller.
The setup menu appears in the display.
3
Use the arrow [ ]/[ ] buttons to select
“ASb,” and then press [ENTER].
The Hardware setup menu appears in the display.
4
Use the arrow [ ]/[ ] buttons to select
“ASb On” or “ASb Off”.
5
Press the [ENTER] button on the remote
controller to complete the setting.
Note:
• Press [RETURN] to return to the previous menu.
Setting the Display Brightness
Changing radio wave intensity
DIMMER
SETUP RETURN
ENTER
Advanced Setup Menu
SETUP RETURN
ENTER
SN29401267A_T-4030_En_20161004-2.book 21 ページ ２０１６年１０月４日 火曜日 午後６時１０分