Onkyo T-411RDS-409 User Manual

RDS reception is only available on the T-411RDS model.
How to search fora station which broad-i
casts your favorite category (PTY scan)
1. Press the RDS button, and the programme type of the
currently selected station will be shown on the display
(for example, “SPORT”).
If the station you are receiving is not broadcasting RDS,
“NOT RDS” (this is not an RDS station) will be shown on
the display.
2. Use the ◄ TUNING/PRESET ► buttons to select another
programme type (PTY) (for example, “ROCK M”).
See the PTY description below.
3. Press the SCAN button to start searching for the cho¬
sen PTY. When a station is received with the desired
PTY, the scanning stops for approximately 5 seconds,
before the unit starts scanning again.
4. When the desired station is reached, press SCAN again
to stop scanning.
Receiving RDS traffic information
1. Press the RDS button until TP appears on the display.
If t T P : is shown on the display, it indicates that the
current station is broadcasting traffic information.
2. Press the SCAN button to start searching for a TP sta¬
tion.
When the unit receives a TP station, it stops scanning. If
the unit cannot receive any signal. "NOT FIND'* (cannot
find the station) is shown on the display.
1
Searching for the station which sends the
clearest and strongest signal. (AF search)
If the station you are listening to is not an RDS station, this
search function cannot be used.
1. Press the RDS button until AF appears on the display
If the station you are receiving is not broadcasting RDS.
“NOT RDS" (this is not an RDS station) will be shown on
the display.
2. Press the SCAN button to start searching for the stron¬
gest signal that this station can be received on.
Displaying Radio Text (RT)
If the station you are listening to is not an RDS station, this
function cannot be used.
1. Each time you press the DISPLAY button, the display
changes as follows.
|—> Frequency-
Radio Text <_
Character or Programme
Service Name
_ i
If the current station you are listening to is not an RDS sta¬
tion, only the frequency of the station and the characters (see
pages 11) appears. (If there have been no characters entered,
only the frequency is shown.)
When RT is received, it can sometimes take between a few sec¬
onds and 15 seconds (more or less) to show RT on the display.
Sometimes the following messages will be shown on the display.
WAIT: indicates that it requires more time to receive the RT
information. When the information is received, the characters
will scroll across the display.
NO TEXT: this appears for 3 seconds and indicates that even
though an RDS station is being received, there is no RT infor¬
mation included.
13

Onkyo T-411RDS-409 Specifications

General

Brand	Onkyo
Model	T-411RDS-409
Category	Tuner
Language	English