Onkyo TX-26 - Specifications; Amplifier Section Specifications; Tuner Section Specifications; General Specifications

Specifications
AMPLIFIER SECTION
Power Output:
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Frequency Response:
RIAA Deviation:
Sensitivity and Impedance:
Phono Overload:
Signal-to-Noise Ratio:
Tone Controls:
Loudness (—30 dB):
Subsonic:
TUNER SECTION
FM:
Tuning Range:
Usable Sensitivity:
50 dB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
{F Rejection Ratio:
Signal-to-Noise Ratio:
Aiternate Channel Att:
AM Suppression Ratio:
Harmonic Distortion:
Frequency Response:
Stereo Separation:
Tuning Level (Hi/Lo):
Muting Level:
Stereo Threshold:
AM:
Tuning Range:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Harmonic Distortion:
GENERAL
Power Supply:
Semiconductors:
Dimensions (WxHxD):
Weight:
SN-29340770
TX-36
50 watts per channel, min. RMS, at 8 ohms, both
channels driven, from 20 Hz to 20 kHz, with no
more than 0.04% THD.
0.04% at rated power
0.04% at 1 watt output
0.04% at rated power
0.04% at 1 watt output
35 at 8 ohms
20 — 30,000 Hz +1 dB
20 — 20,000 Hz +0.8 dB
Phono: 2.5 mV/50 kohms
Tape Play: 150mV/50 kohms
Tape Rec: 150 mV/3.5 kohms (phono)
180 mV RMS at 1 kHz, 0.04% THD
Phono: 85 dB {at 10 mV input, A weighted)
75 dB (IHF A-202)
Tape: 95 dB (A weighted)
80 dB (IHF A-202)
Bass: +8 dB at 100 Hz
Trebie: +8 dB at 10 kHz
+7 dB at 70 Hz, +5 dB at 10 kHz
—6 dB at 15 Hz
87.5 — 108.0 MHz (100 kHz steps)
Mono: 10.8 dBf, 1.9 pV
Stereo: 17.2 dBf, 4.0 nV
Mono: 17.2 dBf,40 nV
Stereo: 37.2 dBf, 40 uV
1.5 dB
40 dB
90 dB
Mono: 72 dB
Stereo: 67 dB
55 dB
50 dB
Mono: 0.15%
Stereo: 0.25%
30 — 15,000 Hz +1.5 dB
40 dB at 1 kHz
30 dB at 100 — 10,000 Hz
23.2 dBf, 8 #V/17.2 dBf,4 nV
23.2 dBf, 8 wV/17.2 dBf, 4uV
520 — 1,710 kHz (10 kHz steps)
30 pV
40 dB
30 dB
40 dB
08%
AC 120V, 60 Hz
FETs: 6 TR: 34 ICs: 11
Diodes: 82
418 x 112 x 340 mm (16 1/2" x 4 1/2” x 13 3/8”)
8.1 kg., 17.8 Ibs.
Specifications and features are subject to change without notice.
TX-26
38 watts per channel, min. RMS, at 8 ohms, both
channels driven, from 20 Hz to 20 kHz, with no
more than 0.08% THD.
0.08% at rated power
0.08% at 1 watt output
0.08% at rated power
0.08% at 1 watt output
35 at 8 ohms
20 — 30,000 Hz +1 dB
20 — 20,000 Hz +0.8 dB
Phono: 2.5 mV/50 kohms
Tape Play: 150mV/50 kohms
Tape Rec: 150 mV/3.5 kohms (phono)
180 mV RMS at 1 kHz, 0.08% THD
Phono: 85 dB (at 10 mV input, A weighted)
75 dB (IHF A-202}
Tape: 95 dB (A weighted)
80 dB (IHF A-202)
Bass: +8 dB at 100 Hz
Treble: +8 dB at 10 kHz
+7 dB at 70 Hz, +5 dB at 10 kHz
87.5 — 108.0 MHz (100 kHz steps}
Mono: 11.2 dBf, 2.0 uV
Stereo: 17.2 dBf, 4.0 nV
Mono: 17.2 dBf, 4.0 uV
Stereo: 37.2 dBf, 40 uV
1.5d8
40 dB
90 dB
Mona: 71 dB
Stereo: 66 dB
55 dB
50 dB
Mono: 0.15%
Stereo: 0.3%
30 — 15,000 Hz +1.5 dB
40 dB at 1 kHz
30 dB at 100 — 10,000 Hz
17.2 dBf, 4.0 uV
17.2 dBf,4.0uV
520 — 1,710 kHz (10 kHz steps)
30 uV
40 dB
30 dB
40 dB
0.8%
AC 120V, 60 Hz
FETs:6 TR:30 iCs: 10
Diodes: 76
418 x 112 x 340 mm (16 1/2” x 4 1/2” x 13 3/8")
7.1 kg., 15.6 Ibs.
ONKYO CORPORATION
International Division: No. 24 Mori Bldg., 23-5, Nishi-Shimbashi 3-chome, Minato-ku,
Tokyo 105, Japan Telex: 242-3551 ONKYO J Tel. 03-432-698 1
ONKYO U.S.A. CORPORATION
200 Williams Drive, Ramsey, N.J. 07446 Telex: 25-710-988-1033 Tel. 201-825-7950
02-47-3K4-ASA Printed in Japan E]