Recording
Unless you have the
full consent
of
the
copyright
holder,
copyright
laws prohibit using your
recordings for anything other than personal
enjoyment!
This section explains how to record the selected input source to a component with recording capability, and how to
record audio from different sources.
-
,--------;::
=
~_?~
~~.
_0
©
0 0
0
0
6 0
00-
'r--------r----l-----r--r'
INPUT
Audio sources can be recorded to a recorder (e.g.,
cassette tape deck, CDR).
1
Prepare the recorder:
•
Set the recorder so that it's ready for recording.
•
If
necessary, adjust the recording level on the
recorder.
•
See the recorder's manual for more information.
2
Use the receiver's
[IN
Pun
selector,
or
the
remote controller's INPUT SELECTOR
buttons
to
select
the component that you
want
to
record from.
3
Start playback
on the component
selected
in step
1.
Notes:
• If you select another input source during recording,
the newly selected input source will
be
recorded.
•
The volume, balance, mute and tone controls have no
effect on the signal being recorded.
r.
:'\
@
eee
En-23
To Next Page
Loading...
