To Next PageTo Next Page
Need help?Do you have a question about the Onkyo TX-8030 and is the answer not in the manual?
General| Impedance | 16 Ω |
|---|---|
| RMS rated power | 260 W |
| Output impedance | 2200 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 2.0 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 180 W |
| Dynamic power per channel (4 Ohm) | 160 W |
| Dynamic power per channel (8 Ohm) | 100 W |
| Power output per channel (20-20KHz@8 Ohm) | 130 W |
| AC (power) in | Yes |
| Audio (L/R) in | 6 |
| Composite video in | 1 |
| Audio (L/R) out | 2 |
| Connectivity technology | Wired |
| Speakers connectivity type | Banana connector |
| Ethernet LAN | No |
| RDS features | PS, PTY, RT, TP |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Display | - |
| Product color | Silver |
| Volume control | Rotary |
| Apple docking compatibility | iPhone, iPod |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 278 W |
| Package weight | 11300 g |
Weight and Dimensions| Depth | 328 mm |
|---|---|
| Width | 435 mm |
| Height | 151 mm |
| Weight | 8800 g |
Guidelines and warnings for safely connecting speakers to the receiver to prevent damage.
Step-by-step instructions on how to properly strip and connect speaker wires to the receiver terminals.
How to connect a powered subwoofer using the receiver's pre-out jacks for enhanced bass.
Instructions for using the receiver as a preamp with an external power amplifier.
How to set the speaker impedance on the receiver to match connected speakers for optimal performance.
General advice on making audio/video connections, including cable types and proper insertion.
How to connect Onkyo components using RI for remote interactive control and system functions.
Instructions on how to connect components for recording audio and video signals.
How to choose which speaker set (A or B) is active for sound output.
How to adjust bass, treble, and speaker balance for desired sound characteristics.
Basic steps to record audio or video from a selected source to a recorder.
How to record audio from one source and video from another simultaneously.
How to select AM or FM bands and tune into radio stations.
General procedure for accessing and modifying advanced settings using the remote controller.
Solutions for issues related to the receiver not turning on or receiving power.
Troubleshooting steps for no sound, quiet audio, or noise during playback.
Steps to resolve issues with no picture or improper video signal connections.
Solutions for noisy reception, poor FM stereo, or missing FM stereo indicators.
Troubleshooting steps for when the remote controller is not working correctly.
