En-23
Listening to the Radio—Continued
■ Tuning into Stations by Frequency
You can tune to AM and FM stations directly by entering
the appropriate frequency.
1
Press the remote controller’s [D.TUN] button.
(Actual display depends on the country.)
2
Within 8 seconds, use the number buttons
to enter the frequency of the radio station.
For example, to tune to 87.5 (FM), press 8, 7, 5.
Presetting AM/FM Stations
You can store up to 40 of your favorite AM/FM radio
stations as presets.
Presetting FM/AM stations is performed by the receiver.
1
Tune to the AM/FM station that you want to
store as a preset.
2
Press the [MEMORY] button.
The preset number flashes.
3
While the preset number flashes (about 8
seconds), use the PRESET []/[] buttons
to select a preset from 1 through 40.
4
Press the [MEMORY] button again to store
the station or channel.
The station or channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your favorite AM/
FM radio stations.
To Next Page
