Do you have a question about the Onkyo TX-8011 and is the answer not in the manual?
Tuning range | FM, MW |
---|---|
Power Consumption | 160 W |
Power Output | 50 W per channel (8 ohms, 20 Hz-20 kHz, 0.08% THD, 2 channels driven) |
Frequency Response | 10 Hz–100 kHz (+1 dB, -3 dB) |
Total Harmonic Distortion | 0.08% |
Input Sensitivity | 200mV (line) |
Signal-to-Noise Ratio | 100dB (line) |
Speaker load impedance | 4 Ohms–16 Ohms |
Overview of the receiver's front panel controls and indicators.
Explanation of the receiver's display indicators and messages.
Overview of the receiver's rear panel connections and ports.
Step-by-step guide for connecting speaker sets to the receiver.
How to connect the provided indoor FM and AM antennas.
Guide to connecting external FM antennas for better reception.
Guide to connecting external AM antennas for improved AM reception.
Procedure for powering the stereo receiver on and off.
Solutions for issues related to turning the receiver on or off.
Solutions for problems with no sound or quiet audio output.
Solutions for noisy reception or FM stereo indicator problems.
Troubleshooting common issues with the remote control.