Need help?Do you have a question about the Onkyo TX-8390 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Speaker Impedance | 4-16 Ohms |
| Bluetooth Codec | SBC, AAC |
| Phono Input | Yes (MM) |
| Channels | 2 |
| Total Harmonic Distortion | 0.08% |
| Frequency Response | 10 Hz-100 kHz/+1 dB, -3 dB |
| Outputs | Subwoofer, Headphone |
| Wireless | Bluetooth |
| Radio | FM/AM |
| Input Sensitivity and Impedance | 200 mVrms/47 k-ohms (Line) |
| Signal-to-Noise Ratio | 106 dB (Line) |
| Tuner Section | FM/AM |
| USB Input | Yes |
| Power Output | 100 W/Ch (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC) |
| Inputs | Phono |
Details on how to connect speakers and configure speaker settings for optimal audio.
Instructions for connecting the unit to your TV, covering ARC and non-ARC connections.
Guides for connecting AV components with HDMI and audio components to the unit.
Steps for connecting the unit to your network via wired LAN or Wi-Fi for network functions.
How to play audio from AV components like Blu-ray players through the unit.
Instructions for wirelessly playing audio from BLUETOOTH-enabled devices.
Guide to enjoying Internet radio services such as TuneIn Radio via network connection.
Configure TV output, OSD, and assign HDMI and digital/analog audio inputs.
Settings for speaker configuration, crossover, distance, level calibration, and equalization.
Configuration for HDMI, Network, Bluetooth, Power Management, and Sonos Connect.
Solutions for erratic operation, power issues, and unit restarts.
Troubleshooting steps for no sound, poor sound, no image, and out-of-sync audio/video.
Resolving problems with Bluetooth, Network, USB, and Wireless LAN connections.
To Next Page
