Onkyo TX-8390 - Connecting a Power Amplifier

24
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Connecting a Power Amplier
You can connect a power amplier to the unit and use the unit as a pre-amplier
in order to produce a large volume that cannot be output with the unit only.
Connect the front speakers to the power amplier. For details, refer to the power
amplier's instruction manual.
• Use the PRE OUT FRONT jacks for connection as show on the left.
Setup
• Settings are required to output audio to the power amplier. Press SETUP on
the remote controller, and set "2. Speaker" - "Conguration" - "Zone 2 Lineout"
( p85) to "Front".
a Analog audio cable
a
Power amplier