16
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
Remote Controller
1. ON/STANDBY button
2. INPUT SELECTOR buttons: Switches the input to be played.
3. Play buttons: Used to control play of a Music Server ( p50) or device
connected via USB ( p47), or of RI connected devices. Also, switching to
"CEC MODE" with "13. MODE button" allows you to operate an HDMI CEC
function-enabled AV component. (Some devices may not be operated.)
• The , , and buttons can only be used when playing RI connected
devices.
4. REPEAT button: Used for repeat play operations when playing Music Server
or USB. Each time you press the button, the mode switches from (1-track
repeat) to (folder repeat).
MEMORY button: Used to register DAB (European models)/AM (North
American models)/FM radio stations.
5. SPEAKER A/B button: Select whether to output audio from SPEAKER A,
SPEAKER B or both.
6. Cursor buttons ( / / / ) and ENTER button: Select an item with the
cursors, and press ENTER to conrm your selection. Pressing / button
allows you to switch the screen when a music folder list or le list is not
displayed on one screen on the TV.
7. SETUP button: Displays advanced setting items on the TV or the display to
have a more enjoyable experience with this unit. ( p78)
8. CH (+/-) buttons: Used to select DAB (European models)/AM (North American
models)/FM radio stations.
9. Numbered buttons
10.
DISPLAY button: Switches the information on the display. You can display
information such as the input source and input format when pressed
repeatedly during play.
When receiving stations transmitting RDS, it displays text information.
(European models)
11.
DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
12.
REMOTE MODE MAIN/ZONE 2 buttons: Switch the remote controller
operation mode to the main room or the separate room (ZONE 2). ( p69)
13.
RANDOM button: Used for random play operations when playing Music Server
To Next Page
Loading...
Need help?
General
