Onkyo TX-DS575 - Amplifier Section; Video Section; Tuner Section

TX-DS575
SPECIFICAT
AMPLIFIER SECTION
Continuous Average Power
output (FTC)
All channels:
Continuous Power output (DIN)
Maximum Power output (EIAJ)
Total Harmonic Distortion:
IM Distortion:
Damping Factor:
Input Sensitivity and Impedance
PHONO:
LINE (CD, TAPE, DVD,
VIDEO 1, 2, 3):
MULTICHANNEL INPUT
(FRONT L/R, SUR-
ROUND L/R, CENTER):
(SUBWOOFER):
COAXIAL 1, 2 (DIGITAL):
Output Level and Impedance
Rec out (TAPE, VIDEO 1):
Pre out (SUBWOOFER):
Phono Overload:
Frequency Response:
RIAA Deviation:
Tone Control
Bass:
Treble:
Signal-to-Noise Ratio
Phono:
CD/Tape:
VIDEO SECTION
Input sensitivity/Impedance
(DVD, VIDEO 1, 2, 3)
VIDEO (Composite):
Output Level/Impedance
(VIDEO 1, MONITOR)
VIDEO (Composite):
TUNER SECTION
FM
Tuning Range:
Usable Sensitivity
Mono:
Stereo:
50 dB Quieting Sensitivity
Mono:
Stereo:
Capture Ratio:
Image Rejection Ratio
U.S.A. & Canadian models:
Other area models:
IONS
70 watts per channel min. RMS at
8 ohms, 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
90 watts min. RMS at 6 ohms, 2 chan-
nels driven from 1 kHz with no more
than 0.1% total harmonic distortion.
100 watts x 5 at 6 ohms
130 watts x 5 at 6 ohms
0.08% at rated power (Front)
0.08% at rated power (Front)
60 at 8 ohms (Front)
2.5 mV, 50 kohms
200 mV, 50 kohms
200 mV, 50 kohms
36 mV, 50 kohms
0.5 Vp-p, 75 ohms
200 mV, 2.2 kohms
1 V, 2.2 kohms
70 mV RMS at I kHz, 0.5% T.H.D.
20 Hz to 30 kHz, +1 dB
20 Hz to 20 kHz, +0.8 dB
+10 dB at 100 Hz
+10 dB at 10 kHz
80 dB (IHF A, 5 mV input)
100 dB (IHF A)
| Vp-p, 75 ohms
1 Vp-p, 75 ohms
87.5 — 108.0 MHz
11.2 dBf, 1.0 wV (75 ohms)
17.2 dBf, 2.0 nV (75 ohms)
17.2 dBf, 2.0 uV (75 ohms)
37.2 dBf, 20 t'V (75 ohms)
2.0 dB
40 dB
85 dB
IF Rejection Ratio:
Signal-to-Noise Ratio
Mono:
Stereo:
Alternate Channel Attenuation:
Selectivity:
AM Suppression Ratio:
Total Harmonic Distortion
Mono:
Stereo:
Frequency Response:
Stereo Separation:
AM
Tuning Range
U.S.A. & Canadian models:
European & Australian
models:
Worldwide models:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Total Harmonic Distortion:
GENERAL
Power Supply:
Power Consumption:
Dimensions (W X H x D):
Weight:
REMOTE CONTROL
Transmitter:
Signal range:
Power supply:
90 dB
76 dB
70 dB
55 dB
50 dB (DIN)
50 dB
0.2%
0.3%
30 Hz — 15 kHz, +1.0 dB
45 dB at 1 kHz
30 dB at 100 Hz — 10 kHz
530—1,710 kHz (10 kHz steps)
522—1,611 kHz (9 kHz steps)
531—1,602 kHz (9 kHz steps),
530—1,710 kHz (10 kHz steps)
30 uv
40 dB
40 dB
40 dB
0.7%
AC 120 V, 60 Hz
AC 230 V, 50 Hz
AC 220-230 V and 120 V switchable,
50/60 Hz
3.9A
325 W
435 x 175 X 390 mm
17-1/8" X 6-7/8" x 15-3/8"
12.3 kg, 27.1 Ibs.
13.0 kg, 28.7 Ibs.
12.9 kg, 28.4 Ibs.
Infrared
Approx. 5 meters, 16 ft.
Two “AA” batteries (1.5 V x 2)
Specifications
and
features
are
subject
to
change
without
notice.
Power
supply
and
voltage
vary
depending
on
the
area
in
which
the
unit
is
purchased.